ACP console log opened 23-Oct-2013 02:04:00 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 02:04:00 This is AcquireScheduler V3.5.2 02:04:00 Custom image file path/names are in use 02:04:00 Custom auto-flip parameters are in use 02:04:00 PreFlip=300 PostFlip=120 AF=300 PU=60 02:04:00 Hardware GEM pier side reporting is available. 02:04:01 Initializing AcquireSupport V6.0.7 02:04:01 Weather safe, server is Weather Server Simulator 02:04:01 Telescope is ACP->TMO, driver V3 02:04:01 Dome is MaxDome 02:04:02 MaxIm DL/CCD is version 5.18 02:04:02 Imager is QSI Universal 02:04:02 Guider is SX Universal(internal/off-axis) 02:04:02 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 02:04:02 Calculated field of view (arcmin): H = 18.4 V = 13.8 02:04:02 Using focus offsets from FilterInfo.txt 02:04:02 ACPS Observation SN_2013dy(1 of 1) 02:04:02 (belongs to Project AAVSO_Monitoring, Plan SN_2013dy) 02:04:02 (turning on sidereal tracking) 02:04:02 Pointing updates are enabled 02:04:02 Start slew to SN_2013dy... 02:04:41 **Script Error (Tracking has been stopped)** 02:04:41 Source: ASCOM.SiTechDll.Telescope 02:04:41 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. 02:04:41 Script Context: 02:04:41 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 02:04:41 1739: End If 02:04:41 1740: Else 02:04:41 => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW 02:04:41 ^ 02:04:41 1742: End If 02:04:41 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 02:04:41 1744: 02:04:41 -- end -- ACP console log closed 23-Oct-2013 02:04:41 UTC