ACP console log opened 11-May-2015 11:13:41 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 11:13:41 This is AutoFlat version 6.1.5 11:13:42 Using flat plan SchedulerDawnFlats.txt 11:13:42 Waiting to start dawn flats at 5:28:39 AM 11:13:42 (tracking off) 11:24:39 (tracking on) 11:24:39 Start slew to flat area... 11:24:42 (wait for slew to complete) 11:24:46 (slew complete) 11:28:39 Starting dawn flats. High Sun at 6:10:21 AM 11:28:39 Starting flat field acquisition. 11:28:39 Reducing slew settle time to 0 sec. 11:28:39 **Filter C does not exist. Skipping this flat set. 11:28:39 **Filter I does not exist. Skipping this flat set. 11:28:39 **Filter R does not exist. Skipping this flat set. 11:28:39 Doing 5 flats in V at binning 1 11:28:39 Start slew to flat area... 11:28:42 (wait for slew to complete) 11:28:44 (slew complete) 11:28:44 TEST V: 10 sec at bin 1 11:29:00 Testing with 64 x 64 sub-frame 11:29:21 Camera exposing 11:29:27 **Failed to start the exposure 11:29:27 **Script Error (Tracking has been stopped)** 11:29:27 Source: MaxIm.CCDCamera 11:29:27 Message: **Failed to start the exposure Probably an error in the flat plan at line 709 column 17. 11:29:27 Script Context: 11:29:27 706: Console.PrintLine ErrMsg ' Log it regardless 11:29:27 707: If ErrCode <> ERR_TOOLATE Then ' Unless it's a "too late" error 11:29:27 708: On Error GoTo 0 ' Re-arm error trapping 11:29:27 => 709: Err.Raise ErrCode, ErrSource, ErrMsg & vbCrLf & _ 11:29:27 ^ 11:29:27 710: "Probably an error in the flat plan" ' Resignal with the error, it's fatal 11:29:27 711: Else ' Too late for that filter, try next! 11:29:27 712: On Error GoTo 0 11:29:27 -- end -- ACP console log closed 11-May-2015 11:29:27 UTC