ACP console log opened 06-May-2015 11:18:32 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 11:18:32 This is AutoFlat version 6.1.5 11:18:32 Using flat plan SchedulerDawnFlats.txt 11:18:32 Waiting to start dawn flats at 5:33:20 AM 11:18:32 (tracking off) 11:29:20 (tracking on) 11:29:20 Start slew to flat area... 11:29:22 (wait for slew to complete) 11:29:44 (slew complete) 11:33:20 Starting dawn flats. High Sun at 6:14:29 AM 11:33:20 Starting flat field acquisition. 11:33:20 Reducing slew settle time to 0 sec. 11:33:20 **Filter C does not exist. Skipping this flat set. 11:33:20 **Filter I does not exist. Skipping this flat set. 11:33:20 **Filter R does not exist. Skipping this flat set. 11:33:20 Doing 5 flats in V at binning 1 11:33:20 Start slew to flat area... 11:33:21 (wait for slew to complete) 11:33:27 (slew complete) 11:33:27 TEST V: 10 sec at bin 1 11:33:43 Testing with 64 x 64 sub-frame 11:34:04 Camera exposing 11:34:10 **Failed to start the exposure 11:34:10 **Script Error (Tracking has been stopped)** 11:34:10 Source: MaxIm.CCDCamera 11:34:10 Message: **Failed to start the exposure Probably an error in the flat plan at line 709 column 17. 11:34:10 Script Context: 11:34:10 706: Console.PrintLine ErrMsg ' Log it regardless 11:34:10 707: If ErrCode <> ERR_TOOLATE Then ' Unless it's a "too late" error 11:34:10 708: On Error GoTo 0 ' Re-arm error trapping 11:34:10 => 709: Err.Raise ErrCode, ErrSource, ErrMsg & vbCrLf & _ 11:34:10 ^ 11:34:10 710: "Probably an error in the flat plan" ' Resignal with the error, it's fatal 11:34:10 711: Else ' Too late for that filter, try next! 11:34:10 712: On Error GoTo 0 11:34:10 -- end -- ACP console log closed 06-May-2015 11:34:10 UTC