ACP console log opened 16-Apr-2018 11:03:12 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
11:03:12 This is AcquireScheduler V3.5.2
11:03:12 Custom image file path/names are in use
11:03:12 Custom auto-flip parameters are in use
11:03:12   PreFlip=300 PostFlip=120 AF=300 PU=60
11:03:12 Hardware GEM pier side reporting is available.
11:03:13 Initializing AcquireSupport V6.0.7
11:03:13 Weather safe, server is Boltwood Cloud Sensor II
11:03:13 Telescope is ACP->ACP->TMO61, driver V3
11:03:13 Dome is MaxDome
11:03:13 MaxIm DL/CCD is version 5.18
11:03:13 Imager is QSI Universal
11:03:13 Imager readout modes:
11:03:13   0 is Image Quality
11:03:13 Guider is SX Universal(internal/off-axis)
11:03:13 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
11:03:13 Calculated field of view (arcmin): H = 18.4 V = 13.8
11:03:13 Using focus offsets from FilterInfo.txt
11:03:13 ACPS Observation V1723_Aql(1 of 1)
11:03:13   (belongs to Project Nova_Monitoring, Plan V1723_Aql)
11:03:13   (turning on sidereal tracking)
11:03:13 Pointing updates are enabled
11:03:13   Start slew to V1723_Aql...
11:03:15   (wait for slew to complete)
11:04:03   (slew complete)
11:04:03     [flip check:  Tn=560s HAc=-4389s GW=T HAz=-3829s DWz=T WF=no]
11:04:03   Updating pointing...
11:04:03   Switching from I to V filter for pointing exposure
11:04:03   Focus change of 25 steps required
11:04:13   (taking 5 sec. exposure, V filter, binning = 4)
11:04:13   (using Image Quality readout mode)
11:04:13   (starting exposure)
11:04:25   (exposure complete and image downloaded)
11:04:25   Calibrating image...
11:04:25 **Calibration failed. Original image saved.
11:04:25 **MaxIm reports No suitable calibration groups were found.
11:04:25   Image finished
11:04:25   Plate-solve pointing image.
11:04:25   39 image stars found
11:04:26   16 catalog stars found
11:04:26 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
11:04:26   Start slew to offset...
11:04:27   (wait for slew to complete)
11:04:34 [**REFRESH TIMER EXCEPTION**]
11:04:34 [Source: MaxDome.Dome.1]
11:04:34 [Bad rotation sensor or stalled motor]
11:04:34 [Phase = 5]
11:04:34 **Pointing update error from ACP:
    The telescope is not connected.
11:04:34 **Script Error**
11:04:34 Source:  ACP
11:04:34 Message: The telescope is not connected. at line 1103 column 13.
11:04:34 Script Context:
11:04:34     1100:             '
11:04:34     1101:             ' Check and do AutoFlip (See AutoFlipIf() below)
11:04:34     1102:             '
11:04:34 =>  1103:             If Telescope.AlignmentMode = 2 Then                     ' For GEM
11:04:34                       ^
11:04:34     1104:                 AutoFlipIf (IMG.ExposureInterval + PREFLIPMARGIN), OBS.Name, _
11:04:34     1105:                                 OBS.RA, TargetRARate, OBS.Dec, TargetDecRate, OBS.PA
11:04:34     1106:             End If
11:04:34 -- end --
ACP console log closed 16-Apr-2018 11:04:34 UTC