ACP console log opened 26-Feb-2018 10:56:11 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 10:56:11 This is AcquireScheduler V3.5.2 10:56:11 Custom image file path/names are in use 10:56:11 Custom auto-flip parameters are in use 10:56:11 PreFlip=300 PostFlip=120 AF=300 PU=60 10:56:11 Hardware GEM pier side reporting is available. 10:56:12 Initializing AcquireSupport V6.0.7 10:56:12 Weather safe, server is Boltwood Cloud Sensor II 10:56:12 Telescope is ACP->ACP->TMO61, driver V3 10:56:13 Dome is MaxDome 10:56:13 MaxIm DL/CCD is version 5.18 10:56:13 Imager is QSI Universal 10:56:13 Imager readout modes: 10:56:13 0 is Image Quality 10:56:13 Guider is SX Universal(internal/off-axis) 10:56:13 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 10:56:13 Calculated field of view (arcmin): H = 18.4 V = 13.8 10:56:13 Using focus offsets from FilterInfo.txt 10:56:13 ACPS Observation V841_Oph(1 of 1) 10:56:13 (belongs to Project AAVSO_Monitoring, Plan V841_Oph) 10:56:13 (turning on sidereal tracking) 10:56:13 Pointing updates are enabled 10:56:13 Start slew to V841_Oph... 10:56:13 **Script Error (Tracking has been stopped)** 10:56:13 Source: ASCOM.SiTechDll.Telescope 10:56:13 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. 10:56:13 Script Context: 10:56:13 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 10:56:13 1739: End If 10:56:13 1740: Else 10:56:13 => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW 10:56:13 ^ 10:56:13 1742: End If 10:56:13 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 10:56:13 1744: 10:56:13 -- end -- ACP console log closed 26-Feb-2018 10:56:13 UTC