ACP console log opened 26-Feb-2018 12:06:57 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
12:06:57 This is AcquireScheduler V3.5.2
12:06:57 Custom image file path/names are in use
12:06:57 Custom auto-flip parameters are in use
12:06:57   PreFlip=300 PostFlip=120 AF=300 PU=60
12:06:57 Hardware GEM pier side reporting is available.
12:06:58 Initializing AcquireSupport V6.0.7
12:06:58 Weather safe, server is Boltwood Cloud Sensor II
12:06:58 Telescope is ACP->ACP->TMO61, driver V3
12:06:59 Dome is MaxDome
12:06:59 MaxIm DL/CCD is version 5.18
12:06:59 Imager is QSI Universal
12:06:59 Imager readout modes:
12:06:59   0 is Image Quality
12:06:59 Guider is SX Universal(internal/off-axis)
12:06:59 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
12:06:59 Calculated field of view (arcmin): H = 18.4 V = 13.8
12:06:59 Using focus offsets from FilterInfo.txt
12:06:59 ACPS Observation V1723_Aql(1 of 1)
12:06:59   (belongs to Project Nova_Monitoring, Plan V1723_Aql)
12:06:59   (turning on sidereal tracking)
12:06:59 Pointing updates are enabled
12:06:59   Start slew to V1723_Aql...
12:06:59 **Script Error (Tracking has been stopped)**
12:06:59 Source:  ASCOM.SiTechDll.Telescope
12:06:59 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
12:06:59 Script Context:
12:06:59     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
12:06:59     1739:         End If
12:06:59     1740:     Else
12:06:59 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
12:06:59                   ^
12:06:59     1742:     End If
12:06:59     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
12:06:59     1744:     
12:06:59 -- end --
ACP console log closed 26-Feb-2018 12:06:59 UTC