ACP console log opened 26-Feb-2018 11:52:30 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
11:52:30 This is AcquireScheduler V3.5.2
11:52:30 Custom image file path/names are in use
11:52:30 Custom auto-flip parameters are in use
11:52:30   PreFlip=300 PostFlip=120 AF=300 PU=60
11:52:30 Hardware GEM pier side reporting is available.
11:52:31 Initializing AcquireSupport V6.0.7
11:52:31 Weather safe, server is Boltwood Cloud Sensor II
11:52:31 Telescope is ACP->ACP->TMO61, driver V3
11:52:31 Dome is MaxDome
11:52:31 MaxIm DL/CCD is version 5.18
11:52:31 Imager is QSI Universal
11:52:31 Imager readout modes:
11:52:31   0 is Image Quality
11:52:31 Guider is SX Universal(internal/off-axis)
11:52:31 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
11:52:31 Calculated field of view (arcmin): H = 18.4 V = 13.8
11:52:31 Using focus offsets from FilterInfo.txt
11:52:31 ACPS Observation V1721_Aql(1 of 1)
11:52:31   (belongs to Project Nova_Monitoring, Plan V1721_Aql)
11:52:31   (turning on sidereal tracking)
11:52:31 Pointing updates are enabled
11:52:31   Start slew to V1721_Aql...
11:52:32 **Script Error (Tracking has been stopped)**
11:52:32 Source:  ASCOM.SiTechDll.Telescope
11:52:32 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
11:52:32 Script Context:
11:52:32     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
11:52:32     1739:         End If
11:52:32     1740:     Else
11:52:32 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
11:52:32                   ^
11:52:32     1742:     End If
11:52:32     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
11:52:32     1744:     
11:52:32 -- end --
ACP console log closed 26-Feb-2018 11:52:32 UTC