ACP console log opened 26-Feb-2018 11:08:39 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
11:08:39 This is AcquireScheduler V3.5.2
11:08:39 Custom image file path/names are in use
11:08:39 Custom auto-flip parameters are in use
11:08:39   PreFlip=300 PostFlip=120 AF=300 PU=60
11:08:39 Hardware GEM pier side reporting is available.
11:08:40 Initializing AcquireSupport V6.0.7
11:08:40 Weather safe, server is Boltwood Cloud Sensor II
11:08:40 Telescope is ACP->ACP->TMO61, driver V3
11:08:40 Dome is MaxDome
11:08:40 MaxIm DL/CCD is version 5.18
11:08:40 Imager is QSI Universal
11:08:40 Imager readout modes:
11:08:40   0 is Image Quality
11:08:40 Guider is SX Universal(internal/off-axis)
11:08:40 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
11:08:40 Calculated field of view (arcmin): H = 18.4 V = 13.8
11:08:40 Using focus offsets from FilterInfo.txt
11:08:40 ACPS Observation SDSSJ121027+502735(1 of 1)
11:08:40   (belongs to Project NMSU, Plan SDSSJ121027+502735)
11:08:40   (turning on sidereal tracking)
11:08:40 Pointing updates are enabled
11:08:41   Start slew to SDSSJ121027+502735...
11:08:41 **Script Error (Tracking has been stopped)**
11:08:41 Source:  ASCOM.SiTechDll.Telescope
11:08:41 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
11:08:41 Script Context:
11:08:41     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
11:08:41     1739:         End If
11:08:41     1740:     Else
11:08:41 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
11:08:41                   ^
11:08:41     1742:     End If
11:08:41     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
11:08:41     1744:     
11:08:41 -- end --
ACP console log closed 26-Feb-2018 11:08:41 UTC