ACP console log opened 26-Feb-2018 11:12:00 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 11:12:00 This is AcquireScheduler V3.5.2 11:12:00 Custom image file path/names are in use 11:12:00 Custom auto-flip parameters are in use 11:12:00 PreFlip=300 PostFlip=120 AF=300 PU=60 11:12:00 Hardware GEM pier side reporting is available. 11:12:01 Initializing AcquireSupport V6.0.7 11:12:01 Weather safe, server is Boltwood Cloud Sensor II 11:12:01 Telescope is ACP->ACP->TMO61, driver V3 11:12:01 Dome is MaxDome 11:12:01 MaxIm DL/CCD is version 5.18 11:12:01 Imager is QSI Universal 11:12:01 Imager readout modes: 11:12:01 0 is Image Quality 11:12:01 Guider is SX Universal(internal/off-axis) 11:12:01 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 11:12:01 Calculated field of view (arcmin): H = 18.4 V = 13.8 11:12:01 Using focus offsets from FilterInfo.txt 11:12:01 ACPS Observation M56(1 of 1) 11:12:01 (belongs to Project AAVSO_Monitoring, Plan M56) 11:12:01 (turning on sidereal tracking) 11:12:02 Pointing updates are enabled 11:12:02 Start slew to M56... 11:12:02 **Script Error (Tracking has been stopped)** 11:12:02 Source: ASCOM.SiTechDll.Telescope 11:12:02 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9. 11:12:02 Script Context: 11:12:02 1738: SUP.CalcSimImageCoordinates TargetRA, TargetDec ' Calculate simulator image 11:12:02 1739: End If 11:12:02 1740: Else 11:12:02 => 1741: SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec ' START THE SLEW 11:12:02 ^ 11:12:02 1742: End If 11:12:02 1743: If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA ' Always start rotator slew 11:12:02 1744: 11:12:02 -- end -- ACP console log closed 26-Feb-2018 11:12:02 UTC