ACP console log opened 31-Jan-2018 12:56:08 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
12:56:08 This is AcquireScheduler V3.5.2
12:56:08 Custom image file path/names are in use
12:56:08 Custom auto-flip parameters are in use
12:56:08   PreFlip=300 PostFlip=120 AF=300 PU=60
12:56:08 Hardware GEM pier side reporting is available.
12:56:09 Initializing AcquireSupport V6.0.7
12:56:09 Weather safe, server is Boltwood Cloud Sensor II
12:56:09 Telescope is ACP->ACP->TMO61, driver V3
12:56:09 Dome is MaxDome
12:56:10 MaxIm DL/CCD is version 5.18
12:56:10 Imager is QSI Universal
12:56:10 Imager readout modes:
12:56:10   0 is Image Quality
12:56:10 Guider is SX Universal(internal/off-axis)
12:56:10 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
12:56:10 Calculated field of view (arcmin): H = 18.4 V = 13.8
12:56:10 Using focus offsets from FilterInfo.txt
12:56:10 ACPS Observation V841_Oph(1 of 1)
12:56:10   (belongs to Project AAVSO_Monitoring, Plan V841_Oph)
12:56:10   (turning on sidereal tracking)
12:56:10 Pointing updates are enabled
12:56:10   Start slew to V841_Oph...
12:56:13 **Script Error (Tracking has been stopped)**
12:56:13 Source:  ASCOM.SiTechDll.Telescope
12:56:13 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
12:56:13 Script Context:
12:56:13     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
12:56:13     1739:         End If
12:56:13     1740:     Else
12:56:13 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
12:56:13                   ^
12:56:13     1742:     End If
12:56:13     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
12:56:13     1744:     
12:56:13 -- end --
ACP console log closed 31-Jan-2018 12:56:13 UTC