ACP console log opened 05-May-2017 06:27:39 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:27:39 This is AcquireScheduler V3.5.2
06:27:39 Custom image file path/names are in use
06:27:39 Custom auto-flip parameters are in use
06:27:39   PreFlip=300 PostFlip=120 AF=300 PU=60
06:27:39 Hardware GEM pier side reporting is available.
06:27:40 Initializing AcquireSupport V6.0.7
06:27:40 Weather safe, server is Boltwood Cloud Sensor II
06:27:40 Telescope is ACP->ACP->TMO61, driver V3
06:27:40 Dome is MaxDome
06:27:40 MaxIm DL/CCD is version 5.18
06:27:40 Imager is QSI Universal
06:27:40 Imager readout modes:
06:27:40   0 is Image Quality
06:27:40 Guider is SX Universal(internal/off-axis)
06:27:40 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:27:40 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:27:40 Using focus offsets from FilterInfo.txt
06:27:40 ACPS Observation V841_Oph(1 of 1)
06:27:40   (belongs to Project AAVSO_Monitoring, Plan V841_Oph)
06:27:40   (turning on sidereal tracking)
06:27:40 Pointing updates are enabled
06:27:40   Start slew to V841_Oph...
06:27:41 **Script Error (Tracking has been stopped)**
06:27:41 Source:  ASCOM.SiTechDll.Telescope
06:27:41 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
06:27:41 Script Context:
06:27:41     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
06:27:41     1739:         End If
06:27:41     1740:     Else
06:27:41 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
06:27:41                   ^
06:27:41     1742:     End If
06:27:41     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
06:27:41     1744:     
06:27:41 -- end --
ACP console log closed 05-May-2017 06:27:41 UTC