ACP console log opened 05-May-2017 07:11:59 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:11:59 This is AcquireScheduler V3.5.2
07:11:59 Custom image file path/names are in use
07:11:59 Custom auto-flip parameters are in use
07:11:59   PreFlip=300 PostFlip=120 AF=300 PU=60
07:11:59 Hardware GEM pier side reporting is available.
07:12:00 Initializing AcquireSupport V6.0.7
07:12:00 Weather safe, server is Boltwood Cloud Sensor II
07:12:00 Telescope is ACP->ACP->TMO61, driver V3
07:12:00 Dome is MaxDome
07:12:01 MaxIm DL/CCD is version 5.18
07:12:01 Imager is QSI Universal
07:12:01 Imager readout modes:
07:12:01   0 is Image Quality
07:12:01 Guider is SX Universal(internal/off-axis)
07:12:01 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:12:01 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:12:01 Using focus offsets from FilterInfo.txt
07:12:01 ACPS Observation V1722_Aql(1 of 1)
07:12:01   (belongs to Project Nova_Monitoring, Plan V1722_Aql)
07:12:01   (turning on sidereal tracking)
07:12:01 Pointing updates are enabled
07:12:01   Start slew to V1722_Aql...
07:12:01 **Script Error (Tracking has been stopped)**
07:12:01 Source:  ASCOM.SiTechDll.Telescope
07:12:01 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:12:01 Script Context:
07:12:01     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:12:01     1739:         End If
07:12:01     1740:     Else
07:12:01 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:12:01                   ^
07:12:01     1742:     End If
07:12:01     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:12:01     1744:     
07:12:01 -- end --
ACP console log closed 05-May-2017 07:12:01 UTC