ACP console log opened 05-May-2017 09:39:16 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
09:39:16 This is AcquireScheduler V3.5.2
09:39:16 Custom image file path/names are in use
09:39:16 Custom auto-flip parameters are in use
09:39:16   PreFlip=300 PostFlip=120 AF=300 PU=60
09:39:16 Hardware GEM pier side reporting is available.
09:39:17 Initializing AcquireSupport V6.0.7
09:39:17 Weather safe, server is Boltwood Cloud Sensor II
09:39:17 Telescope is ACP->ACP->TMO61, driver V3
09:39:17 Dome is MaxDome
09:39:17 MaxIm DL/CCD is version 5.18
09:39:17 Imager is QSI Universal
09:39:17 Imager readout modes:
09:39:17   0 is Image Quality
09:39:17 Guider is SX Universal(internal/off-axis)
09:39:17 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
09:39:17 Calculated field of view (arcmin): H = 18.4 V = 13.8
09:39:17 Using focus offsets from FilterInfo.txt
09:39:17 ACPS Observation V0809_Cep(1 of 1)
09:39:17   (belongs to Project Nova_Monitoring, Plan V0809_Cep)
09:39:17   (turning on sidereal tracking)
09:39:17 Pointing updates are enabled
09:39:17   Start slew to V0809_Cep...
09:39:18 **Script Error (Tracking has been stopped)**
09:39:18 Source:  ASCOM.SiTechDll.Telescope
09:39:18 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
09:39:18 Script Context:
09:39:18     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
09:39:18     1739:         End If
09:39:18     1740:     Else
09:39:18 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
09:39:18                   ^
09:39:18     1742:     End If
09:39:18     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
09:39:18     1744:     
09:39:18 -- end --
ACP console log closed 05-May-2017 09:39:18 UTC