ACP console log opened 05-May-2017 07:16:35 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:16:35 This is AcquireScheduler V3.5.2
07:16:35 Custom image file path/names are in use
07:16:35 Custom auto-flip parameters are in use
07:16:35   PreFlip=300 PostFlip=120 AF=300 PU=60
07:16:35 Hardware GEM pier side reporting is available.
07:16:37 Initializing AcquireSupport V6.0.7
07:16:37 Weather safe, server is Boltwood Cloud Sensor II
07:16:37 Telescope is ACP->ACP->TMO61, driver V3
07:16:37 Dome is MaxDome
07:16:37 MaxIm DL/CCD is version 5.18
07:16:37 Imager is QSI Universal
07:16:37 Imager readout modes:
07:16:37   0 is Image Quality
07:16:37 Guider is SX Universal(internal/off-axis)
07:16:37 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:16:37 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:16:37 Using focus offsets from FilterInfo.txt
07:16:37 ACPS Observation QQ_Vul_TMO61(1 of 1)
07:16:37   (belongs to Project Walker, Plan QQ_Vul)
07:16:37   (turning on sidereal tracking)
07:16:37 Pointing updates are enabled
07:16:37   Start slew to QQ_Vul_TMO61...
07:16:37 **Script Error (Tracking has been stopped)**
07:16:37 Source:  ASCOM.SiTechDll.Telescope
07:16:37 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:16:37 Script Context:
07:16:37     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:16:37     1739:         End If
07:16:37     1740:     Else
07:16:37 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:16:37                   ^
07:16:37     1742:     End If
07:16:37     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:16:37     1744:     
07:16:37 -- end --
ACP console log closed 05-May-2017 07:16:37 UTC