ACP console log opened 05-May-2017 10:28:45 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
10:28:45 This is AcquireScheduler V3.5.2
10:28:45 Custom image file path/names are in use
10:28:45 Custom auto-flip parameters are in use
10:28:45   PreFlip=300 PostFlip=120 AF=300 PU=60
10:28:45 Hardware GEM pier side reporting is available.
10:28:46 Initializing AcquireSupport V6.0.7
10:28:46 Weather safe, server is Boltwood Cloud Sensor II
10:28:46 Telescope is ACP->ACP->TMO61, driver V3
10:28:47 Dome is MaxDome
10:28:47 MaxIm DL/CCD is version 5.18
10:28:47 Imager is QSI Universal
10:28:47 Imager readout modes:
10:28:47   0 is Image Quality
10:28:47 Guider is SX Universal(internal/off-axis)
10:28:47 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
10:28:47 Calculated field of view (arcmin): H = 18.4 V = 13.8
10:28:47 Using focus offsets from FilterInfo.txt
10:28:47 ACPS Observation NGC_7790(1 of 1)
10:28:47   (belongs to Project AAVSO_Monitoring, Plan NGC_7790)
10:28:47   (turning on sidereal tracking)
10:28:47 Pointing updates are enabled
10:28:47   Start slew to NGC_7790...
10:28:47 **Script Error (Tracking has been stopped)**
10:28:47 Source:  ASCOM.SiTechDll.Telescope
10:28:47 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
10:28:47 Script Context:
10:28:47     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
10:28:47     1739:         End If
10:28:47     1740:     Else
10:28:47 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
10:28:47                   ^
10:28:47     1742:     End If
10:28:47     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
10:28:47     1744:     
10:28:47 -- end --
ACP console log closed 05-May-2017 10:28:47 UTC