ACP console log opened 05-May-2017 07:12:47 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:12:47 This is AcquireScheduler V3.5.2
07:12:47 Custom image file path/names are in use
07:12:47 Custom auto-flip parameters are in use
07:12:47   PreFlip=300 PostFlip=120 AF=300 PU=60
07:12:47 Hardware GEM pier side reporting is available.
07:12:48 Initializing AcquireSupport V6.0.7
07:12:48 Weather safe, server is Boltwood Cloud Sensor II
07:12:48 Telescope is ACP->ACP->TMO61, driver V3
07:12:49 Dome is MaxDome
07:12:49 MaxIm DL/CCD is version 5.18
07:12:49 Imager is QSI Universal
07:12:49 Imager readout modes:
07:12:49   0 is Image Quality
07:12:49 Guider is SX Universal(internal/off-axis)
07:12:49 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:12:49 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:12:49 Using focus offsets from FilterInfo.txt
07:12:49 ACPS Observation MV_Leo(1 of 1)
07:12:49   (belongs to Project SXN, Plan MV_Leo)
07:12:49   (turning on sidereal tracking)
07:12:49 Pointing updates are enabled
07:12:49   Start slew to MV_Leo...
07:13:24 **Script Error (Tracking has been stopped)**
07:13:24 Source:  ASCOM.SiTechDll.Telescope
07:13:24 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
07:13:24 Script Context:
07:13:24     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
07:13:24     1739:         End If
07:13:24     1740:     Else
07:13:24 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
07:13:24                   ^
07:13:24     1742:     End If
07:13:24     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
07:13:24     1744:     
07:13:24 -- end --
ACP console log closed 05-May-2017 07:13:24 UTC