ACP console log opened 05-May-2017 10:14:21 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
10:14:21 This is AcquireScheduler V3.5.2
10:14:21 Custom image file path/names are in use
10:14:21 Custom auto-flip parameters are in use
10:14:21   PreFlip=300 PostFlip=120 AF=300 PU=60
10:14:21 Hardware GEM pier side reporting is available.
10:14:23 Initializing AcquireSupport V6.0.7
10:14:23 Weather safe, server is Boltwood Cloud Sensor II
10:14:23 Telescope is ACP->ACP->TMO61, driver V3
10:14:23 Dome is MaxDome
10:14:23 MaxIm DL/CCD is version 5.18
10:14:23 Imager is QSI Universal
10:14:23 Imager readout modes:
10:14:23   0 is Image Quality
10:14:23 Guider is SX Universal(internal/off-axis)
10:14:23 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
10:14:23 Calculated field of view (arcmin): H = 18.4 V = 13.8
10:14:23 Using focus offsets from FilterInfo.txt
10:14:23 ACPS Observation GSC_3649-0825(1 of 1)
10:14:23   (belongs to Project Staels, Plan GSC_3649-0825)
10:14:23   (turning on sidereal tracking)
10:14:23 Pointing updates are enabled
10:14:23   Start slew to GSC_3649-0825...
10:14:23 **Script Error (Tracking has been stopped)**
10:14:24 Source:  ASCOM.SiTechDll.Telescope
10:14:24 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
10:14:24 Script Context:
10:14:24     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
10:14:24     1739:         End If
10:14:24     1740:     Else
10:14:24 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
10:14:24                   ^
10:14:24     1742:     End If
10:14:24     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
10:14:24     1744:     
10:14:24 -- end --
ACP console log closed 05-May-2017 10:14:24 UTC