ACP console log opened 05-May-2017 02:59:21 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:59:21 This is AcquireScheduler V3.5.2
02:59:21 Custom image file path/names are in use
02:59:21 Custom auto-flip parameters are in use
02:59:21   PreFlip=300 PostFlip=120 AF=300 PU=60
02:59:21 Hardware GEM pier side reporting is available.
02:59:22 Initializing AcquireSupport V6.0.7
02:59:22 Weather safe, server is Boltwood Cloud Sensor II
02:59:22 Telescope is ACP->ACP->TMO61, driver V3
02:59:22 Dome is MaxDome
02:59:22 MaxIm DL/CCD is version 5.18
02:59:22 Imager is QSI Universal
02:59:22 Imager readout modes:
02:59:22   0 is Image Quality
02:59:22 Guider is SX Universal(internal/off-axis)
02:59:22 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:59:22 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:59:22 Using focus offsets from FilterInfo.txt
02:59:22 ACPS Observation ES_Dra(1 of 1)
02:59:22   (belongs to Project SXN, Plan ES_Dra)
02:59:22   (turning on sidereal tracking)
02:59:22 Pointing updates are enabled
02:59:22   Start slew to ES_Dra...
02:59:33 **Script Error (Tracking has been stopped)**
02:59:33 Source:  ASCOM.SiTechDll.Telescope
02:59:33 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:59:33 Script Context:
02:59:33     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:59:33     1739:         End If
02:59:33     1740:     Else
02:59:33 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:59:33                   ^
02:59:33     1742:     End If
02:59:33     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:59:33     1744:     
02:59:33 -- end --
ACP console log closed 05-May-2017 02:59:33 UTC