ACP console log opened 05-May-2017 02:57:19 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:57:19 This is AcquireScheduler V3.5.2
02:57:19 Custom image file path/names are in use
02:57:19 Custom auto-flip parameters are in use
02:57:19   PreFlip=300 PostFlip=120 AF=300 PU=60
02:57:19 Hardware GEM pier side reporting is available.
02:57:20 Initializing AcquireSupport V6.0.7
02:57:20 Weather safe, server is Boltwood Cloud Sensor II
02:57:20 Telescope is ACP->ACP->TMO61, driver V3
02:57:20 Dome is MaxDome
02:57:20 MaxIm DL/CCD is version 5.18
02:57:20 Imager is QSI Universal
02:57:20 Imager readout modes:
02:57:20   0 is Image Quality
02:57:20 Guider is SX Universal(internal/off-axis)
02:57:20 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:57:20 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:57:20 Using focus offsets from FilterInfo.txt
02:57:20 ACPS Observation AT_Cnc(1 of 1)
02:57:20   (belongs to Project SXN, Plan AT_Cnc)
02:57:20   (turning on sidereal tracking)
02:57:20 Pointing updates are enabled
02:57:20   Start slew to AT_Cnc...
02:57:24 **Script Error (Tracking has been stopped)**
02:57:24 Source:  ASCOM.SiTechDll.Telescope
02:57:24 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:57:24 Script Context:
02:57:24     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:57:24     1739:         End If
02:57:24     1740:     Else
02:57:24 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:57:24                   ^
02:57:24     1742:     End If
02:57:24     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:57:24     1744:     
02:57:24 -- end --
ACP console log closed 05-May-2017 02:57:24 UTC