ACP console log opened 17-Apr-2017 05:41:34 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:41:34 This is AcquireScheduler V3.5.2
05:41:34 Custom image file path/names are in use
05:41:34 Custom auto-flip parameters are in use
05:41:34   PreFlip=300 PostFlip=120 AF=300 PU=60
05:41:34 Hardware GEM pier side reporting is available.
05:41:35 Initializing AcquireSupport V6.0.7
05:41:35 Weather safe, server is Boltwood Cloud Sensor II
05:41:35 Telescope is ACP->ACP->TMO61, driver V3
05:41:35 Dome is MaxDome
05:41:35 MaxIm DL/CCD is version 5.18
05:41:35 Imager is QSI Universal
05:41:35 Imager readout modes:
05:41:35   0 is Image Quality
05:41:35 Guider is SX Universal(internal/off-axis)
05:41:35 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:41:35 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:41:35 Using focus offsets from FilterInfo.txt
05:41:35 ACPS Observation SY_Cnc(1 of 1)
05:41:35   (belongs to Project SXN, Plan SY_Cnc)
05:41:35   (turning on sidereal tracking)
05:41:35 Pointing updates are enabled
05:41:35   Start slew to SY_Cnc...
05:41:37   (wait for slew to complete)
05:42:00   (slew complete)
05:42:00     [flip check:  Tn=420s HAc=11723s GW=T HAz=12143s DWz=T WF=no]
05:42:00   Updating pointing...
05:42:00   Switching from I to V filter for pointing exposure
05:42:00   Focus change of 25 steps required
05:42:10   (taking 5 sec. exposure, V filter, binning = 4)
05:42:10   (using Image Quality readout mode)
05:42:10   (starting exposure)
05:42:23   (exposure complete and image downloaded)
05:42:23   Calibrating image...
05:42:23 **Calibration failed. Original image saved.
05:42:23 **MaxIm reports No suitable calibration groups were found.
05:42:23   Image finished
05:42:23   Plate-solve pointing image.
05:42:23   13 image stars found
05:42:23   61 catalog stars found
05:42:23   Solved! 12 stars matched.
05:42:23   Average residual is 0.55 arcsec.
05:42:23   Pointing error is 0.876 arcmin @ angle 306.60
05:42:23   True focal length is 346.0 cm.
05:42:23   True binned plate scales (arcsec/pix): H = 1.29 V = 1.28
05:42:23   True image center (J2000): 09h 01m 00.4s   17° 54' 27.33"
05:42:23   Imager sky position angle is 357.8 deg.
05:42:23   [sync] pointing model updated
05:42:23   Internal guider, always re-slew
05:42:23   Re-slew to target.
05:42:23   Start slew to SY_Cnc...
05:42:24   (wait for slew to complete)
05:42:26   (slew complete)
05:42:26   Target is now centered.
05:42:26     [flip check:  Tn=360s HAc=11750s GW=T HAz=12109s DWz=T WF=no]
05:42:26   Imaging to SY_Cnc_V_20170417_054226
05:42:26   (taking 60 sec. exposure, V filter, binning = 1)
05:42:26   (using Image Quality readout mode)
05:42:26   (starting exposure)
05:43:47   (exposure complete and image downloaded)
05:43:47   Image finished
05:43:50   Plate-solve SY_Cnc_V_20170417_054226 final image.
05:43:52   66 image stars found
05:43:52   61 catalog stars found
05:43:53 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
05:43:55     [flip check:  Tn=360s HAc=11836s GW=T HAz=12198s DWz=T WF=no]
05:43:55   Imaging to SY_Cnc_V_20170417_054355
05:43:55   (taking 60 sec. exposure, V filter, binning = 1)
05:43:55   (using Image Quality readout mode)
05:43:55   (starting exposure)
05:45:17   (exposure complete and image downloaded)
05:45:17   Image finished
05:45:20   First image plate-solve failed, skip solves until next target.
05:45:22     [flip check:  Tn=360s HAc=11923s GW=T HAz=12285s DWz=T WF=no]
05:45:22   Imaging to SY_Cnc_V_20170417_054522
05:45:22   (taking 60 sec. exposure, V filter, binning = 1)
05:45:22   (using Image Quality readout mode)
05:45:22   (starting exposure)
05:46:44   (exposure complete and image downloaded)
05:46:44   Image finished
05:46:46   First image plate-solve failed, skip solves until next target.
05:46:50     [flip check:  Tn=360s HAc=12012s GW=T HAz=12374s DWz=T WF=no]
05:46:50   Imaging to SY_Cnc_I_20170417_054650
05:46:50   Switching from V to I filter for imaging
05:46:50   Focus change of -25 steps required
05:47:00   (taking 60 sec. exposure, I filter, binning = 1)
05:47:00   (using Image Quality readout mode)
05:47:00   (starting exposure)
05:48:21   (exposure complete and image downloaded)
05:48:21   Image finished
05:48:24   Plate-solve SY_Cnc_I_20170417_054650 final image.
05:48:26   64 image stars found
05:48:26   61 catalog stars found
05:48:26 ** Focal length off by more than 10%, solution rejected.
05:48:29     [flip check:  Tn=360s HAc=12111s GW=T HAz=12473s DWz=T WF=no]
05:48:29   Imaging to SY_Cnc_I_20170417_054829
05:48:29   (taking 60 sec. exposure, I filter, binning = 1)
05:48:29   (using Image Quality readout mode)
05:48:29   (starting exposure)
05:49:50   (exposure complete and image downloaded)
05:49:50   Image finished
05:49:53   First image plate-solve failed, skip solves until next target.
05:49:56     [flip check:  Tn=360s HAc=12199s GW=T HAz=12561s DWz=T WF=no]
05:49:56   Imaging to SY_Cnc_I_20170417_054956
05:49:56   (taking 60 sec. exposure, I filter, binning = 1)
05:49:56   (using Image Quality readout mode)
05:49:56   (starting exposure)
05:51:17   (exposure complete and image downloaded)
05:51:18   Image finished
05:51:20   First image plate-solve failed, skip solves until next target.
05:51:24 Run complete
ACP console log closed 17-Apr-2017 05:51:24 UTC