ACP console log opened 08-Apr-2017 06:01:29 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
06:01:30 Initializing AcquireSupport V6.0.7
06:01:30 Weather safe, server is Boltwood Cloud Sensor II
06:01:30 Telescope is ACP->ACP->TMO61, driver V3
06:01:30 Dome is MaxDome
06:01:30 MaxIm DL/CCD is version 5.18
06:01:30 Imager is QSI Universal
06:01:30 Imager readout modes:
06:01:30   0 is Image Quality
06:01:30 Guider is SX Universal(internal/off-axis)
06:01:30 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
06:01:30 Calculated field of view (arcmin): H = 18.4 V = 13.8
06:01:30 Using focus offsets from FilterInfo.txt
06:01:30 This is AcquireImages V6.0.9
06:01:30 Custom auto-flip parameters are in use
06:01:30 Hardware pier side reporting is available.
06:01:30 Compiling plan...
06:01:30 (using ACP Plan Compiler V6.0.3)
06:01:30 ...plan OK!
06:01:30 This plan has 1 live target(s), 1 images
06:01:30 There are 0.3 min. of actual imaging time
06:01:30 Image file set-numbers start with 1
06:01:30 Pointing exposures:
06:01:30   Exposure Interval = 5
06:01:30   Min brightness = 0
06:01:30   Sigma = 3
06:01:30   Cat max mag = 18
06:01:30 Final exposures:
06:01:30   Min brightness = 0
06:01:30   Sigma = 3
06:01:30   Cat max mag = 18
06:01:30 Starting run for plan last-plan-from-web.txt...
06:01:30 ==== Starting target Irene ====
06:01:30 ;
06:01:30 ; Single target color series plan by TM61, created Sat, 8 Apr 2017 06:01:28 UTC
06:01:30 ;
06:01:30   (turning tracking on for live image(s))
06:01:36   Start slew to Irene...
06:01:38   (wait for slew to complete)
06:02:21   (slew complete)
06:02:21   (request plan-start pointing update)
06:02:21   Ready for Irene (# 1 of 1 in set 1)
06:02:21     [flip check:  Tn=375s HAc=7059s GW=T HAz=7434s DWz=T WF=no]
06:02:21   Updating pointing...
06:02:21   Switching from I to V filter for pointing exposure
06:02:21   Focus change of 25 steps required
06:02:31   (taking 5 sec. exposure, V filter, binning = 4)
06:02:31   (using Image Quality readout mode)
06:02:31   (starting exposure)
06:02:46   (exposure complete and image downloaded)
06:02:46   Calibrating image...
06:02:46 **Calibration failed. Original image saved.
06:02:46 **MaxIm reports No suitable calibration groups were found.
06:02:46   Image finished
06:02:46   Plate-solve pointing image.
06:02:46   10 image stars found
06:02:46   40 catalog stars found
06:02:46   Solved! 8 stars matched.
06:02:46   Average residual is 0.55 arcsec.
06:02:46   Pointing error is 0.473 arcmin @ angle 203.10
06:02:46   True focal length is 346.2 cm.
06:02:46   True binned plate scales (arcsec/pix): H = 1.29 V = 1.28
06:02:46   True image center (J2000): 10h 03m 41.6s   26° 22' 54.11"
06:02:46   Imager sky position angle is 357.8 deg.
06:03:03   [sync] pointing model updated
06:03:04   Internal guider, always re-slew
06:03:04   Re-slew to target.
06:03:04   Start slew to Irene...
06:03:05   (wait for slew to complete)
06:03:07   (slew complete)
06:03:07   Target is now centered.
06:03:07     [flip check:  Tn=315s HAc=7103s GW=T HAz=7420s DWz=T WF=no]
06:03:07 **DUPLICATE IMAGE NAME - ADDED _dupe-4
06:03:07   === Place in plan ===
06:03:07       Set 1 of 1
06:03:07       Target is "Irene" (1 of 1)
06:03:07         Repeat 1 of 1 for this target
06:03:07           Filter V (1 of 1)
06:03:07             Image 1 of 1 for this filter
06:03:07   Imaging to Irene-S001-R001-C001-V_dupe-4
06:03:07   (taking 15 sec. exposure, V filter, binning = 1)
06:03:07   (using Image Quality readout mode)
06:03:07   (starting exposure)
06:03:44   (exposure complete and image downloaded)
06:03:44   Image finished
06:03:46   Plate-solve final image
06:03:48   17 image stars found
06:03:48   40 catalog stars found
06:03:48 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
06:03:48   Will skip final image solves until target changes
06:03:48   (turning tracking off for safety)
06:03:49 End of run.
ACP console log closed 08-Apr-2017 06:03:49 UTC