ACP console log opened 05-Apr-2017 05:19:07 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 05:19:08 Initializing AcquireSupport V6.0.7 05:19:09 Weather safe, server is Boltwood Cloud Sensor II 05:19:09 Telescope is ACP->ACP->TMO61, driver V3 05:19:09 Dome is MaxDome 05:19:09 MaxIm DL/CCD is version 5.18 05:19:09 Imager is QSI Universal 05:19:09 Imager readout modes: 05:19:09 0 is Image Quality 05:19:09 Guider is SX Universal(internal/off-axis) 05:19:09 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 05:19:09 Calculated field of view (arcmin): H = 18.4 V = 13.8 05:19:09 Using focus offsets from FilterInfo.txt 05:19:09 This is AcquireImages V6.0.9 05:19:09 Custom auto-flip parameters are in use 05:19:09 Hardware pier side reporting is available. 05:19:09 Compiling plan... 05:19:09 (using ACP Plan Compiler V6.0.3) 05:19:09 ...plan OK! 05:19:09 This plan has 1 live target(s), 1 images 05:19:09 There are 0.2 min. of actual imaging time 05:19:09 Image file set-numbers start with 1 05:19:09 Pointing exposures: 05:19:09 Exposure Interval = 5 05:19:09 Min brightness = 0 05:19:09 Sigma = 3 05:19:09 Cat max mag = 18 05:19:09 Final exposures: 05:19:09 Min brightness = 0 05:19:09 Sigma = 3 05:19:09 Cat max mag = 18 05:19:09 Starting run for plan last-plan-from-web.txt... 05:19:09 ==== Starting target Irene ==== 05:19:09 ; 05:19:09 ; Single target color series plan by TM61, created Wed, 5 Apr 2017 05:19:07 UTC 05:19:09 ; 05:19:09 (turning tracking on for live image(s)) 05:19:15 Start slew to Irene... 05:19:17 (wait for slew to complete) 05:20:00 (slew complete) 05:20:00 (request plan-start pointing update) 05:20:00 Ready for Irene (# 1 of 1 in set 1) 05:20:00 [flip check: Tn=370s HAc=3437s GW=T HAz=4179s DWz=T WF=no] 05:20:00 Updating pointing... 05:20:00 Switching from I to V filter for pointing exposure 05:20:00 Focus change of 25 steps required 05:20:10 (taking 5 sec. exposure, V filter, binning = 4) 05:20:10 (using Image Quality readout mode) 05:20:10 (starting exposure) 05:20:24 (exposure complete and image downloaded) 05:20:24 Calibrating image... 05:20:24 **Calibration failed. Original image saved. 05:20:24 **MaxIm reports No suitable calibration groups were found. 05:20:24 Image finished 05:20:24 Plate-solve pointing image. 05:20:24 10 image stars found 05:20:25 40 catalog stars found 05:20:25 Solved! 8 stars matched. 05:20:25 Average residual is 0.38 arcsec. 05:20:25 Pointing error is 1.413 arcmin @ angle 199.20 05:20:25 True focal length is 346.0 cm. 05:20:25 True binned plate scales (arcsec/pix): H = 1.29 V = 1.29 05:20:25 True image center (J2000): 10h 03m 32.9s 26° 35' 54.82" 05:20:25 Imager sky position angle is 357.8 deg. 05:20:25 [sync] pointing model updated 05:20:25 Internal guider, always re-slew 05:20:25 Re-slew to target. 05:20:25 Start slew to Irene... 05:20:26 (wait for slew to complete) 05:20:28 (slew complete) 05:20:28 Target is now centered. 05:20:28 [flip check: Tn=310s HAc=3837s GW=T HAz=4147s DWz=T WF=no] 05:20:28 === Place in plan === 05:20:28 Set 1 of 1 05:20:28 Target is "Irene" (1 of 1) 05:20:28 Repeat 1 of 1 for this target 05:20:28 Filter B (1 of 1) 05:20:28 Image 1 of 1 for this filter 05:20:28 Imaging to Irene-S001-R001-C001-B 05:20:28 Switching from V to B filter for imaging 05:20:28 Focus change of 9 steps required 05:20:39 (taking 10 sec. exposure, B filter, binning = 1) 05:20:39 (using Image Quality readout mode) 05:20:39 (starting exposure) 05:21:11 (exposure complete and image downloaded) 05:21:11 Image finished 05:21:13 Plate-solve final image 05:21:15 9 image stars found 05:21:15 40 catalog stars found 05:21:15 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality. 05:21:15 Will skip final image solves until target changes 05:21:15 (turning tracking off for safety) 05:21:17 End of run. ACP console log closed 05-Apr-2017 05:21:17 UTC