ACP console log opened 05-Apr-2017 04:48:54 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:48:55 Initializing AcquireSupport V6.0.7
04:48:55 Weather safe, server is Boltwood Cloud Sensor II
04:48:55 Telescope is ACP->ACP->TMO61, driver V3
04:48:55 Dome is MaxDome
04:48:55 MaxIm DL/CCD is version 5.18
04:48:55 Imager is QSI Universal
04:48:55 Imager readout modes:
04:48:55   0 is Image Quality
04:48:55 Guider is SX Universal(internal/off-axis)
04:48:55 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:48:55 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:48:55 Using focus offsets from FilterInfo.txt
04:48:55 This is AcquireImages V6.0.9
04:48:55 Custom auto-flip parameters are in use
04:48:55 Hardware pier side reporting is available.
04:48:55 Compiling plan...
04:48:55 (using ACP Plan Compiler V6.0.3)
04:48:55 ...plan OK!
04:48:55 This plan has 1 live target(s), 4 images
04:48:55 There are 0.1 min. of actual imaging time
04:48:55 Image file set-numbers start with 1
04:48:55 Pointing exposures:
04:48:55   Exposure Interval = 5
04:48:55   Min brightness = 0
04:48:55   Sigma = 3
04:48:55   Cat max mag = 18
04:48:55 Final exposures:
04:48:55   Min brightness = 0
04:48:55   Sigma = 3
04:48:55   Cat max mag = 18
04:48:55 Starting run for plan last-plan-from-web.txt...
04:48:55 ==== Starting target delGem ====
04:48:55 ;
04:48:55 ; Single target color series plan by TM61, created Wed, 5 Apr 2017 04:48:53 UTC
04:48:55 ;
04:48:55   (turning tracking on for live image(s))
04:49:01   Start slew to delGem...
04:49:03   (wait for slew to complete)
04:49:06   (slew complete)
04:49:06   (request plan-start pointing update)
04:49:06   Ready for delGem (# 1 of 1 in set 1)
04:49:06   delGem specifies 4 sets of images.
04:49:06   This is filter group 1 of 4.
04:49:07     [flip check:  Tn=361s HAc=11756s GW=T HAz=12117s DWz=T WF=no]
04:49:07   Updating pointing...
04:49:07   Switching from I to V filter for pointing exposure
04:49:07   Focus change of 25 steps required
04:49:17   (taking 5 sec. exposure, V filter, binning = 4)
04:49:17   (using Image Quality readout mode)
04:49:17   (starting exposure)
04:49:32   (exposure complete and image downloaded)
04:49:32   Calibrating image...
04:49:33 **Calibration failed. Original image saved.
04:49:33 **MaxIm reports No suitable calibration groups were found.
04:49:33   Image finished
04:49:33   Plate-solve pointing image.
04:49:33   77 image stars found
04:49:33   167 catalog stars found
04:49:33   Solved! 51 stars matched.
04:49:33   Average residual is 0.27 arcsec.
04:49:33   Pointing error is 2.758 arcmin @ angle 87.83
04:49:33   True focal length is 346.0 cm.
04:49:33   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
04:49:33   True image center (J2000): 07h 20m 19.0s   21° 59' 02.57"
04:49:33   Imager sky position angle is 357.7 deg.
04:49:33   [sync] pointing model updated
04:49:33   Internal guider, always re-slew
04:49:33   Re-slew to target.
04:49:33   Start slew to delGem...
04:49:35   (wait for slew to complete)
04:49:36   (slew complete)
04:49:36   Target is now centered.
04:49:36     [flip check:  Tn=301s HAc=11785s GW=T HAz=12086s DWz=T WF=no]
04:49:36 **DUPLICATE IMAGE NAME - ADDED _dupe-4
04:49:36   === Place in plan ===
04:49:36       Set 1 of 1
04:49:36       Target is "delGem" (1 of 1)
04:49:36         Repeat 1 of 1 for this target
04:49:36           Filter B (1 of 4)
04:49:36             Image 1 of 1 for this filter
04:49:36   Imaging to delGem-S001-R001-C001-B_dupe-4
04:49:36   Switching from V to B filter for imaging
04:49:36   Focus change of 9 steps required
04:49:47   (taking 1 sec. exposure, B filter, binning = 1)
04:49:47   (using Image Quality readout mode)
04:49:47   (starting exposure)
04:50:10   (exposure complete and image downloaded)
04:50:10   Image finished
04:50:13   Plate-solve final image
04:50:14   22 image stars found
04:50:15   167 catalog stars found
04:50:15 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
04:50:15   Will skip final image solves until target changes
04:50:15   This is filter group 2 of 4.
04:50:15     [flip check:  Tn=301s HAc=11836s GW=T HAz=12125s DWz=T WF=no]
04:50:15 **DUPLICATE IMAGE NAME - ADDED _dupe-2
04:50:15   === Place in plan ===
04:50:15       Set 1 of 1
04:50:15       Target is "delGem" (1 of 1)
04:50:15         Repeat 1 of 1 for this target
04:50:15           Filter V (2 of 4)
04:50:15             Image 1 of 1 for this filter
04:50:15   Imaging to delGem-S001-R001-C001-V_dupe-2
04:50:15   Switching from B to V filter for imaging
04:50:15   Focus change of -9 steps required
04:50:24   (taking 1 sec. exposure, V filter, binning = 1)
04:50:24   (using Image Quality readout mode)
04:50:24   (starting exposure)
04:50:47   (exposure complete and image downloaded)
04:50:47   Image finished
04:50:49   First image plate-solve failed, skip solves until target changes
04:50:49   This is filter group 3 of 4.
04:50:49     [flip check:  Tn=301s HAc=11870s GW=T HAz=12159s DWz=T WF=no]
04:50:49 **DUPLICATE IMAGE NAME - ADDED _dupe-1
04:50:49   === Place in plan ===
04:50:49       Set 1 of 1
04:50:49       Target is "delGem" (1 of 1)
04:50:49         Repeat 1 of 1 for this target
04:50:49           Filter R (3 of 4)
04:50:49             Image 1 of 1 for this filter
04:50:49   Imaging to delGem-S001-R001-C001-R_dupe-1
04:50:49   Switching from V to R filter for imaging
04:50:49   Focus change of -4 steps required
04:50:59   (taking 1 sec. exposure, R filter, binning = 1)
04:50:59   (using Image Quality readout mode)
04:50:59   (starting exposure)
04:51:22   (exposure complete and image downloaded)
04:51:22   Image finished
04:51:25   First image plate-solve failed, skip solves until target changes
04:51:25   This is filter group 4 of 4.
04:51:25     [flip check:  Tn=301s HAc=11907s GW=T HAz=12196s DWz=T WF=no]
04:51:25 **DUPLICATE IMAGE NAME - ADDED _dupe-1
04:51:25   === Place in plan ===
04:51:25       Set 1 of 1
04:51:25       Target is "delGem" (1 of 1)
04:51:25         Repeat 1 of 1 for this target
04:51:25           Filter I (4 of 4)
04:51:25             Image 1 of 1 for this filter
04:51:25   Imaging to delGem-S001-R001-C001-I_dupe-1
04:51:25   Switching from R to I filter for imaging
04:51:25   Focus change of -21 steps required
04:51:34   (taking 1 sec. exposure, I filter, binning = 1)
04:51:34   (using Image Quality readout mode)
04:51:34   (starting exposure)
04:51:56   (exposure complete and image downloaded)
04:51:56   Image finished
04:51:58   First image plate-solve failed, skip solves until target changes
04:51:58   (turning tracking off for safety)
04:51:59 End of run.
ACP console log closed 05-Apr-2017 04:51:59 UTC