ACP console log opened 05-Apr-2017 04:41:41 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:41:42 Initializing AcquireSupport V6.0.7
04:41:43 Weather safe, server is Boltwood Cloud Sensor II
04:41:43 Telescope is ACP->ACP->TMO61, driver V3
04:41:43 Dome is MaxDome
04:41:43 MaxIm DL/CCD is version 5.18
04:41:43 Imager is QSI Universal
04:41:43 Imager readout modes:
04:41:43   0 is Image Quality
04:41:43 Guider is SX Universal(internal/off-axis)
04:41:43 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:41:43 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:41:43 Using focus offsets from FilterInfo.txt
04:41:43 This is AcquireImages V6.0.9
04:41:43 Custom auto-flip parameters are in use
04:41:43 Hardware pier side reporting is available.
04:41:43 Compiling plan...
04:41:43 (using ACP Plan Compiler V6.0.3)
04:41:43 ...plan OK!
04:41:43 This plan has 1 live target(s), 4 images
04:41:43 There are 0.1 min. of actual imaging time
04:41:43 Image file set-numbers start with 1
04:41:43 Pointing exposures:
04:41:43   Exposure Interval = 5
04:41:43   Min brightness = 0
04:41:43   Sigma = 3
04:41:43   Cat max mag = 18
04:41:43 Final exposures:
04:41:43   Min brightness = 0
04:41:43   Sigma = 3
04:41:43   Cat max mag = 18
04:41:43 Starting run for plan last-plan-from-web.txt...
04:41:43 ==== Starting target delGem ====
04:41:43 ;
04:41:43 ; Single target color series plan by TM61, created Wed, 5 Apr 2017 04:41:41 UTC
04:41:43 ;
04:41:43   (turning tracking on for live image(s))
04:41:49   Start slew to delGem...
04:41:53   (request plan-start pointing update)
04:41:53   Ready for delGem (# 1 of 1 in set 1)
04:41:53   delGem specifies 4 sets of images.
04:41:53   This is filter group 1 of 4.
04:41:53     [flip check:  Tn=361s HAc=11212s GW=T HAz=11683s DWz=T WF=no]
04:41:53   Updating pointing...
04:41:53   Switching from B to V filter for pointing exposure
04:41:53   Focus change of -9 steps required
04:42:03   (taking 5 sec. exposure, V filter, binning = 4)
04:42:03   (using Image Quality readout mode)
04:42:03   (starting exposure)
04:42:16   (exposure complete and image downloaded)
04:42:16   Calibrating image...
04:42:16 **Calibration failed. Original image saved.
04:42:16 **MaxIm reports No suitable calibration groups were found.
04:42:16   Image finished
04:42:16   Plate-solve pointing image.
04:42:16   92 image stars found
04:42:17   167 catalog stars found
04:42:17   Solved! 51 stars matched.
04:42:17   Average residual is 0.27 arcsec.
04:42:17   Pointing error is 2.498 arcmin @ angle 89.03
04:42:17   True focal length is 346.1 cm.
04:42:17   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
04:42:17   True image center (J2000): 07h 20m 17.9s   21° 58' 58.85"
04:42:17   Imager sky position angle is 357.7 deg.
04:42:17   Image FWHM is 2.2 arcsec (1.70 pixels)
04:42:17   (avg FWHM = 2.54 arcsec)
04:42:17   [sync] pointing model updated
04:42:17   Internal guider, always re-slew
04:42:17   Re-slew to target.
04:42:17   Start slew to delGem...
04:42:18   (wait for slew to complete)
04:42:20   (slew complete)
04:42:20   Target is now centered.
04:42:20     [flip check:  Tn=301s HAc=11348s GW=T HAz=11649s DWz=T WF=no]
04:42:20 **DUPLICATE IMAGE NAME - ADDED _dupe-3
04:42:20   === Place in plan ===
04:42:20       Set 1 of 1
04:42:20       Target is "delGem" (1 of 1)
04:42:20         Repeat 1 of 1 for this target
04:42:20           Filter B (1 of 4)
04:42:20             Image 1 of 1 for this filter
04:42:20   Imaging to delGem-S001-R001-C001-B_dupe-3
04:42:20   Switching from V to B filter for imaging
04:42:20   Focus change of 9 steps required
04:42:30   (taking 1 sec. exposure, B filter, binning = 1)
04:42:30   (using Image Quality readout mode)
04:42:31   (starting exposure)
04:42:53   (exposure complete and image downloaded)
04:42:53   Image finished
04:42:55   Plate-solve final image
04:42:56   15 image stars found
04:42:57   167 catalog stars found
04:42:57 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
04:42:57   Will skip final image solves until target changes
04:42:57   This is filter group 2 of 4.
04:42:57     [flip check:  Tn=301s HAc=11396s GW=T HAz=11686s DWz=T WF=no]
04:42:57 **DUPLICATE IMAGE NAME - ADDED _dupe-1
04:42:57   === Place in plan ===
04:42:57       Set 1 of 1
04:42:57       Target is "delGem" (1 of 1)
04:42:57         Repeat 1 of 1 for this target
04:42:57           Filter V (2 of 4)
04:42:57             Image 1 of 1 for this filter
04:42:57   Imaging to delGem-S001-R001-C001-V_dupe-1
04:42:57   Switching from B to V filter for imaging
04:42:57   Focus change of -9 steps required
04:43:06   (taking 1 sec. exposure, V filter, binning = 1)
04:43:06   (using Image Quality readout mode)
04:43:06   (starting exposure)
04:43:30   (exposure complete and image downloaded)
04:43:30   Image finished
04:43:32   First image plate-solve failed, skip solves until target changes
04:43:32   This is filter group 3 of 4.
04:43:32     [flip check:  Tn=301s HAc=11431s GW=T HAz=11721s DWz=T WF=no]
04:43:32   === Place in plan ===
04:43:32       Set 1 of 1
04:43:32       Target is "delGem" (1 of 1)
04:43:32         Repeat 1 of 1 for this target
04:43:32           Filter R (3 of 4)
04:43:32             Image 1 of 1 for this filter
04:43:32   Imaging to delGem-S001-R001-C001-R
04:43:32   Switching from V to R filter for imaging
04:43:32   Focus change of -4 steps required
04:43:42   (taking 1 sec. exposure, R filter, binning = 1)
04:43:42   (using Image Quality readout mode)
04:43:42   (starting exposure)
04:44:05   (exposure complete and image downloaded)
04:44:06   Image finished
04:44:07   First image plate-solve failed, skip solves until target changes
04:44:07   This is filter group 4 of 4.
04:44:07     [flip check:  Tn=301s HAc=11467s GW=T HAz=11757s DWz=T WF=no]
04:44:07   === Place in plan ===
04:44:07       Set 1 of 1
04:44:07       Target is "delGem" (1 of 1)
04:44:07         Repeat 1 of 1 for this target
04:44:07           Filter I (4 of 4)
04:44:07             Image 1 of 1 for this filter
04:44:07   Imaging to delGem-S001-R001-C001-I
04:44:07   Switching from R to I filter for imaging
04:44:07   Focus change of -21 steps required
04:44:17   (taking 1 sec. exposure, I filter, binning = 1)
04:44:17   (using Image Quality readout mode)
04:44:17   (starting exposure)
04:44:40   (exposure complete and image downloaded)
04:44:40   Image finished
04:44:41   First image plate-solve failed, skip solves until target changes
04:44:41   (turning tracking off for safety)
04:44:43 End of run.
ACP console log closed 05-Apr-2017 04:44:43 UTC