ACP console log opened 05-Apr-2017 03:54:01 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:54:02 Initializing AcquireSupport V6.0.7
03:54:02 Weather safe, server is Boltwood Cloud Sensor II
03:54:02 Telescope is ACP->ACP->TMO61, driver V3
03:54:03 Dome is MaxDome
03:54:03 MaxIm DL/CCD is version 5.18
03:54:03 Imager is QSI Universal
03:54:03 Imager readout modes:
03:54:03   0 is Image Quality
03:54:03 Guider is SX Universal(internal/off-axis)
03:54:03 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:54:03 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:54:03 Using focus offsets from FilterInfo.txt
03:54:03 This is AcquireImages V6.0.9
03:54:03 Custom auto-flip parameters are in use
03:54:03 Hardware pier side reporting is available.
03:54:03 Compiling plan...
03:54:03 (using ACP Plan Compiler V6.0.3)
03:54:03 ...plan OK!
03:54:03 This plan has 1 live target(s), 1 images
03:54:03 There are 0.0 min. of actual imaging time
03:54:03 Image file set-numbers start with 1
03:54:03 Pointing exposures:
03:54:03   Exposure Interval = 5
03:54:03   Min brightness = 0
03:54:03   Sigma = 3
03:54:03   Cat max mag = 18
03:54:03 Final exposures:
03:54:03   Min brightness = 0
03:54:03   Sigma = 3
03:54:03   Cat max mag = 18
03:54:03 Starting run for plan last-plan-from-web.txt...
03:54:03 ==== Starting target delGem ====
03:54:03 ;
03:54:03 ; Single target color series plan by TM61, created Wed, 5 Apr 2017 03:54:00 UTC
03:54:03 ;
03:54:03   (turning tracking on for live image(s))
03:54:08   Start slew to delGem...
03:54:11   (wait for slew to complete)
03:54:12   (slew complete)
03:54:12   (request plan-start pointing update)
03:54:12   Ready for delGem (# 1 of 1 in set 1)
03:54:12     [flip check:  Tn=361s HAc=8454s GW=T HAz=8813s DWz=T WF=no]
03:54:12   Updating pointing...
03:54:12   (taking 5 sec. exposure, V filter, binning = 4)
03:54:12   (using Image Quality readout mode)
03:54:12   (starting exposure)
03:54:24   (exposure complete and image downloaded)
03:54:24   Calibrating image...
03:54:24 **Calibration failed. Original image saved.
03:54:24 **MaxIm reports No suitable calibration groups were found.
03:54:24   Image finished
03:54:24   Plate-solve pointing image.
03:54:24   50 image stars found
03:54:25   167 catalog stars found
03:54:25   Solved! 40 stars matched.
03:54:25   Average residual is 0.31 arcsec.
03:54:25   Pointing error is 1.522 arcmin @ angle 49.27
03:54:25   True focal length is 345.7 cm.
03:54:25   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
03:54:25   True image center (J2000): 07h 20m 12.1s   21° 59' 55.89"
03:54:25   Imager sky position angle is 357.7 deg.
03:54:25   [sync] pointing model updated
03:54:25   Internal guider, always re-slew
03:54:25   Re-slew to target.
03:54:25   Start slew to delGem...
03:54:26   (wait for slew to complete)
03:54:28   (slew complete)
03:54:28   Target is now centered.
03:54:28     [flip check:  Tn=301s HAc=8469s GW=T HAz=8770s DWz=T WF=no]
03:54:28   === Place in plan ===
03:54:28       Set 1 of 1
03:54:28       Target is "delGem" (1 of 1)
03:54:28         Repeat 1 of 1 for this target
03:54:28           Filter B (1 of 1)
03:54:28             Image 1 of 1 for this filter
03:54:28   Imaging to delGem-S001-R001-C001-B
03:54:28   Switching from V to B filter for imaging
03:54:28   Focus change of 9 steps required
03:54:40   (taking 1 sec. exposure, B filter, binning = 1)
03:54:40   (using Image Quality readout mode)
03:54:40   (starting exposure)
03:55:05   (exposure complete and image downloaded)
03:55:05   Image finished
03:55:07   Plate-solve final image
03:55:08   13 image stars found
03:55:09   167 catalog stars found
03:55:09 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
03:55:09   Will skip final image solves until target changes
03:55:09   (turning tracking off for safety)
03:55:11 End of run.
ACP console log closed 05-Apr-2017 03:55:11 UTC