ACP console log opened 05-Apr-2017 03:50:23 UTC This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope) Licensed to Arne Henden 03:50:24 Initializing AcquireSupport V6.0.7 03:50:24 Weather safe, server is Boltwood Cloud Sensor II 03:50:24 Telescope is ACP->ACP->TMO61, driver V3 03:50:24 Dome is MaxDome 03:50:24 MaxIm DL/CCD is version 5.18 03:50:24 Imager is QSI Universal 03:50:24 Imager readout modes: 03:50:24 0 is Image Quality 03:50:24 Guider is SX Universal(internal/off-axis) 03:50:24 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33 03:50:24 Calculated field of view (arcmin): H = 18.4 V = 13.8 03:50:24 Using focus offsets from FilterInfo.txt 03:50:24 This is AcquireImages V6.0.9 03:50:24 Custom auto-flip parameters are in use 03:50:24 Hardware pier side reporting is available. 03:50:24 Compiling plan... 03:50:24 (using ACP Plan Compiler V6.0.3) 03:50:24 ...plan OK! 03:50:24 This plan has 1 live target(s), 1 images 03:50:24 There are 0.0 min. of actual imaging time 03:50:24 Image file set-numbers start with 1 03:50:24 Pointing exposures: 03:50:24 Exposure Interval = 5 03:50:24 Min brightness = 0 03:50:24 Sigma = 3 03:50:24 Cat max mag = 18 03:50:24 Final exposures: 03:50:24 Min brightness = 0 03:50:24 Sigma = 3 03:50:24 Cat max mag = 18 03:50:24 Starting run for plan last-plan-from-web.txt... 03:50:24 ==== Starting target delGem ==== 03:50:24 ; 03:50:24 ; Single target color series plan by TM61, created Wed, 5 Apr 2017 03:50:22 UTC 03:50:24 ; 03:50:24 (turning tracking on for live image(s)) 03:50:25 (wait for slew to complete) 03:50:42 (slew complete) 03:50:46 Start slew to delGem... 03:50:48 (wait for slew to complete) 03:51:32 (slew complete) 03:51:32 (request plan-start pointing update) 03:51:32 Ready for delGem (# 1 of 1 in set 1) 03:51:32 [flip check: Tn=361s HAc=8292s GW=T HAz=8653s DWz=T WF=no] 03:51:32 Updating pointing... 03:51:32 Switching from I to V filter for pointing exposure 03:51:32 Focus change of 25 steps required 03:51:42 (taking 5 sec. exposure, V filter, binning = 4) 03:51:42 (using Image Quality readout mode) 03:51:42 (starting exposure) 03:51:55 (exposure complete and image downloaded) 03:51:55 Calibrating image... 03:51:55 **Calibration failed. Original image saved. 03:51:55 **MaxIm reports No suitable calibration groups were found. 03:51:55 Image finished 03:51:55 Plate-solve pointing image. 03:51:56 73 image stars found 03:51:56 167 catalog stars found 03:51:56 Solved! 42 stars matched. 03:51:56 Average residual is 0.27 arcsec. 03:51:56 Pointing error is 1.363 arcmin @ angle 63.15 03:51:56 True focal length is 345.9 cm. 03:51:56 True binned plate scales (arcsec/pix): H = 1.29 V = 1.29 03:51:56 True image center (J2000): 07h 20m 12.3s 21° 59' 33.27" 03:51:56 Imager sky position angle is 357.7 deg. 03:52:13 [sync] pointing model updated 03:52:14 Internal guider, always re-slew 03:52:14 Re-slew to target. 03:52:14 Start slew to delGem... 03:52:15 (wait for slew to complete) 03:52:16 (slew complete) 03:52:16 Target is now centered. 03:52:16 [flip check: Tn=301s HAc=8336s GW=T HAz=8637s DWz=T WF=no] 03:52:16 === Place in plan === 03:52:16 Set 1 of 1 03:52:16 Target is "delGem" (1 of 1) 03:52:16 Repeat 1 of 1 for this target 03:52:16 Filter V (1 of 1) 03:52:16 Image 1 of 1 for this filter 03:52:16 Imaging to delGem-S001-R001-C001-V 03:52:16 (taking 1 sec. exposure, V filter, binning = 1) 03:52:16 (using Image Quality readout mode) 03:52:16 (starting exposure) 03:52:40 (exposure complete and image downloaded) 03:52:41 Image finished 03:52:42 Plate-solve final image 03:52:44 41 image stars found 03:52:45 167 catalog stars found 03:52:45 ** Focal length off by more than 10%, solution rejected. 03:52:45 Will skip final image solves until target changes 03:52:45 (turning tracking off for safety) 03:52:46 End of run. ACP console log closed 05-Apr-2017 03:52:46 UTC