ACP console log opened 04-Apr-2017 03:26:42 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:26:45 Initializing AcquireSupport V6.0.7
03:26:45 Weather safe, server is Boltwood Cloud Sensor II
03:26:45 Telescope is ACP->ACP->TMO61, driver V3
03:26:45 Dome is MaxDome
03:26:45 MaxIm DL/CCD is version 5.18
03:26:45 Imager is QSI Universal
03:26:45 Imager readout modes:
03:26:45   0 is Image Quality
03:26:45 Guider is SX Universal(internal/off-axis)
03:26:45 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:26:45 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:26:45 Using focus offsets from FilterInfo.txt
03:26:45 This is AcquireImages V6.0.9
03:26:45 Custom auto-flip parameters are in use
03:26:45 Hardware pier side reporting is available.
03:26:45 Compiling plan...
03:26:45 (using ACP Plan Compiler V6.0.3)
03:26:45 ...plan OK!
03:26:45 This plan has 1 live target(s), 4 images
03:26:45 There are 0.3 min. of actual imaging time
03:26:45 Image file set-numbers start with 1
03:26:45 Pointing exposures:
03:26:45   Exposure Interval = 5
03:26:45   Min brightness = 0
03:26:45   Sigma = 3
03:26:45   Cat max mag = 18
03:26:45 Final exposures:
03:26:45   Min brightness = 0
03:26:45   Sigma = 3
03:26:45   Cat max mag = 18
03:26:45 Starting run for plan last-plan-from-web.txt...
03:26:45 ==== Starting target Vesta ====
03:26:45 ;
03:26:45 ; Single target color series plan by TM61, created Tue, 4 Apr 2017 03:26:40 UTC
03:26:45 ;
03:26:45   (turning tracking on for live image(s))
03:26:51   Start slew to Vesta...
03:26:53   (wait for slew to complete)
03:26:57   (slew complete)
03:26:57   (request plan-start pointing update)
03:26:57   Ready for Vesta (# 1 of 1 in set 1)
03:26:57   Vesta specifies 4 sets of images.
03:26:57   This is filter group 1 of 4.
03:26:57     [flip check:  Tn=365s HAc=5324s GW=T HAz=5707s DWz=T WF=no]
03:26:57   Updating pointing...
03:26:57   Switching from I to V filter for pointing exposure
03:26:57   Focus change of 25 steps required
03:27:08   (taking 5 sec. exposure, V filter, binning = 4)
03:27:08   (using Image Quality readout mode)
03:27:08   (starting exposure)
03:27:23   (exposure complete and image downloaded)
03:27:23   Calibrating image...
03:27:23 **Calibration failed. Original image saved.
03:27:23 **MaxIm reports No suitable calibration groups were found.
03:27:23   Image finished
03:27:23   Plate-solve pointing image.
03:27:23   28 image stars found
03:27:23   82 catalog stars found
03:27:23   Solved! 24 stars matched.
03:27:23   Average residual is 0.31 arcsec.
03:27:23   Pointing error is 1.957 arcmin @ angle 41.77
03:27:23   True focal length is 346.0 cm.
03:27:23   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
03:27:23   True image center (J2000): 07h 40m 46.5s   26° 01' 50.97"
03:27:23   Imager sky position angle is 357.7 deg.
03:27:23   Image FWHM is 2.0 arcsec (1.59 pixels)
03:27:23   (avg FWHM = 1.47 arcsec)
03:27:23   [sync] pointing model updated
03:27:23   Internal guider, always re-slew
03:27:23   Re-slew to target.
03:27:23   Start slew to Vesta...
03:27:25   (wait for slew to complete)
03:27:26   (slew complete)
03:27:27   Target is now centered.
03:27:27     [flip check:  Tn=305s HAc=5377s GW=T HAz=5676s DWz=T WF=no]
03:27:27 **DUPLICATE IMAGE NAME - ADDED _dupe-3
03:27:27   === Place in plan ===
03:27:27       Set 1 of 1
03:27:27       Target is "Vesta" (1 of 1)
03:27:27         Repeat 1 of 1 for this target
03:27:27           Filter B (1 of 4)
03:27:27             Image 1 of 1 for this filter
03:27:27   Imaging to Vesta-S001-R001-C001-B_dupe-3
03:27:27   Switching from V to B filter for imaging
03:27:27   Focus change of 9 steps required
03:27:38   (taking 5 sec. exposure, B filter, binning = 1)
03:27:38   (using Image Quality readout mode)
03:27:38   (starting exposure)
03:28:05   (exposure complete and image downloaded)
03:28:05   Image finished
03:28:08   Plate-solve final image
03:28:10   13 image stars found
03:28:11   81 catalog stars found
03:28:11 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
03:28:11   Will skip final image solves until target changes
03:28:11   This is filter group 2 of 4.
03:28:11     [flip check:  Tn=305s HAc=5421s GW=T HAz=5720s DWz=T WF=no]
03:28:11 **DUPLICATE IMAGE NAME - ADDED _dupe-5
03:28:11   === Place in plan ===
03:28:11       Set 1 of 1
03:28:11       Target is "Vesta" (1 of 1)
03:28:11         Repeat 1 of 1 for this target
03:28:11           Filter V (2 of 4)
03:28:11             Image 1 of 1 for this filter
03:28:11   Imaging to Vesta-S001-R001-C001-V_dupe-5
03:28:11   Switching from B to V filter for imaging
03:28:11   Focus change of -9 steps required
03:28:21   (taking 5 sec. exposure, V filter, binning = 1)
03:28:21   (using Image Quality readout mode)
03:28:21   (starting exposure)
03:28:50   (exposure complete and image downloaded)
03:28:51   Image finished
03:28:54   First image plate-solve failed, skip solves until target changes
03:28:54   This is filter group 3 of 4.
03:28:54     [flip check:  Tn=305s HAc=5464s GW=T HAz=5763s DWz=T WF=no]
03:28:55 **DUPLICATE IMAGE NAME - ADDED _dupe-4
03:28:55   === Place in plan ===
03:28:55       Set 1 of 1
03:28:55       Target is "Vesta" (1 of 1)
03:28:55         Repeat 1 of 1 for this target
03:28:55           Filter R (3 of 4)
03:28:55             Image 1 of 1 for this filter
03:28:55   Imaging to Vesta-S001-R001-C001-R_dupe-4
03:28:55   Switching from V to R filter for imaging
03:28:55   Focus change of -4 steps required
03:29:04   (taking 5 sec. exposure, R filter, binning = 1)
03:29:04   (using Image Quality readout mode)
03:29:04   (starting exposure)
03:29:37   (exposure complete and image downloaded)
03:29:37   Image finished
03:29:43   First image plate-solve failed, skip solves until target changes
03:29:43   This is filter group 4 of 4.
03:29:43     [flip check:  Tn=305s HAc=5514s GW=T HAz=5813s DWz=T WF=no]
03:29:43 **DUPLICATE IMAGE NAME - ADDED _dupe-2
03:29:43   === Place in plan ===
03:29:43       Set 1 of 1
03:29:43       Target is "Vesta" (1 of 1)
03:29:43         Repeat 1 of 1 for this target
03:29:43           Filter I (4 of 4)
03:29:43             Image 1 of 1 for this filter
03:29:43   Imaging to Vesta-S001-R001-C001-I_dupe-2
03:29:43   Switching from R to I filter for imaging
03:29:43   Focus change of -21 steps required
03:29:56   (taking 5 sec. exposure, I filter, binning = 1)
03:29:56   (using Image Quality readout mode)
03:29:56   (starting exposure)
03:30:25   (exposure complete and image downloaded)
03:30:25   Image finished
03:30:29   First image plate-solve failed, skip solves until target changes
03:30:29   (turning tracking off for safety)
03:30:31 End of run.
ACP console log closed 04-Apr-2017 03:30:31 UTC