ACP console log opened 30-Mar-2017 10:58:09 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
10:58:11 Initializing AcquireSupport V6.0.7
10:58:11 Weather safe, server is Boltwood Cloud Sensor II
10:58:11 Telescope is ACP->ACP->TMO61, driver V3
10:58:11 Dome is MaxDome
10:58:11 MaxIm DL/CCD is version 5.18
10:58:11 Imager is QSI Universal
10:58:11 Imager readout modes:
10:58:11   0 is Image Quality
10:58:11 Guider is SX Universal(internal/off-axis)
10:58:11 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
10:58:11 Calculated field of view (arcmin): H = 18.4 V = 13.8
10:58:11 Using focus offsets from FilterInfo.txt
10:58:11 This is AcquireImages V6.0.9
10:58:11 Custom auto-flip parameters are in use
10:58:11 Hardware pier side reporting is available.
10:58:11 Compiling plan...
10:58:11 (using ACP Plan Compiler V6.0.3)
10:58:11 ...plan OK!
10:58:11 This plan has 1 live target(s), 1 images
10:58:11 There are 0.0 min. of actual imaging time
10:58:11 Image file set-numbers start with 1
10:58:11 Pointing exposures:
10:58:11   Exposure Interval = 5
10:58:11   Min brightness = 0
10:58:11   Sigma = 3
10:58:11   Cat max mag = 18
10:58:11 Final exposures:
10:58:11   Min brightness = 0
10:58:11   Sigma = 3
10:58:11   Cat max mag = 18
10:58:11 Starting run for plan last-plan-from-web.txt...
10:58:11 ==== Starting target Jupiter ====
10:58:11 ;
10:58:11 ; Single target color series plan by TM61, created Thu, 30 Mar 2017 10:58:09 UTC
10:58:11 ;
10:58:11   (turning tracking on for live image(s))
10:58:17   Start slew to Jupiter...
10:58:19   (wait for slew to complete)
10:58:57   (slew complete)
10:58:57   (request plan-start pointing update)
10:58:57   Ready for Jupiter (# 1 of 1 in set 1)
10:58:57     [flip check:  Tn=361s HAc=-38396s GW=T HAz=11790s DWz=T WF=no]
10:58:57   Updating pointing...
10:58:57   (taking 5 sec. exposure, V filter, binning = 4)
10:58:57   (using Image Quality readout mode)
10:58:57   (starting exposure)
10:59:12   (exposure complete and image downloaded)
10:59:12   Calibrating image...
10:59:12 **Calibration failed. Original image saved.
10:59:12 **MaxIm reports No suitable calibration groups were found.
10:59:12   Image finished
10:59:12   Plate-solve pointing image.
10:59:12   1 image stars found
10:59:12   64 catalog stars found
10:59:12 ** There are too few image or catalog stars in the area for reliable matching. Take longer exposures, increase the catalog star faint limit, or use a more dense catalog.
10:59:12   Start slew to offset...
10:59:13 **Script Error (Tracking has been stopped)**
10:59:13 Source:  ASCOM.SiTechDll.Telescope
10:59:13 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1328 column 29.
10:59:13 Script Context:
10:59:13     1325:                             if(SUP.Guiding)
10:59:13     1326:                                 SUP.AutoGuide(false);                               // Stop guiding if needed (should be in SUP)
10:59:13     1327:                             isPointing = true;                                      // For ASP (typ.)
10:59:13 =>  1328:                             puDone = SUP.UpdatePointing(Tc.Name, Tc.RA, Tc.Dec, Tc.PA);
10:59:13                                       ^
10:59:13     1329:                             isPointing = false;
10:59:13     1330:                         }
10:59:13     1331:                         if(puDone)                                                  // If it succeeded
10:59:13 -- end --
ACP console log closed 30-Mar-2017 10:59:13 UTC