ACP console log opened 11-Feb-2017 05:25:59 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:25:59 This is AcquireScheduler V3.5.2
05:25:59 Custom image file path/names are in use
05:25:59 Custom auto-flip parameters are in use
05:25:59   PreFlip=300 PostFlip=120 AF=300 PU=60
05:25:59 Hardware GEM pier side reporting is available.
05:26:00 Initializing AcquireSupport V6.0.7
05:26:00 Weather safe, server is Boltwood Cloud Sensor II
05:26:00 Telescope is ACP->ACP->TMO61, driver V3
05:26:00 Dome is MaxDome
05:26:00 MaxIm DL/CCD is version 5.18
05:26:00 Imager is QSI Universal
05:26:00 Imager readout modes:
05:26:00   0 is Image Quality
05:26:00 Guider is SX Universal(internal/off-axis)
05:26:00 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:26:00 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:26:00 Using focus offsets from FilterInfo.txt
05:26:00 ACPS Observation SY_Cnc(1 of 1)
05:26:00   (belongs to Project SXN, Plan SY_Cnc)
05:26:00   (turning on sidereal tracking)
05:26:01 Pointing updates are enabled
05:26:01   Start slew to SY_Cnc...
05:26:02   (wait for slew to complete)
05:26:10   (slew complete)
05:26:10     [flip check:  Tn=420s HAc=-4606s GW=T HAz=-4186s DWz=T WF=no]
05:26:10   Updating pointing...
05:26:10   Switching from I to V filter for pointing exposure
05:26:10   Focus change of 25 steps required
05:26:20   (taking 5 sec. exposure, V filter, binning = 4)
05:26:20   (using Image Quality readout mode)
05:26:20   (starting exposure)
05:26:33   (exposure complete and image downloaded)
05:26:33   Calibrating image...
05:26:33 **Calibration failed. Original image saved.
05:26:33 **MaxIm reports No suitable calibration groups were found.
05:26:33   Image finished
05:26:33   Plate-solve pointing image.
05:26:33   17 image stars found
05:26:33   61 catalog stars found
05:26:33   Solved! 11 stars matched.
05:26:33   Average residual is 0.41 arcsec.
05:26:33   Pointing error is 0.164 arcmin @ angle 31.08
05:26:33   True focal length is 346.7 cm.
05:26:33   True binned plate scales (arcsec/pix): H = 1.28 V = 1.29
05:26:33   True image center (J2000): 09h 01m 03.7s   17° 54' 04.44"
05:26:33   Imager sky position angle is 357.7 deg.
05:26:33   [sync] pointing model updated
05:26:33   Internal guider, always re-slew
05:26:33   Re-slew to target.
05:26:33   Start slew to SY_Cnc...
05:26:34   (wait for slew to complete)
05:26:37   (slew complete)
05:26:37   Target is now centered.
05:26:37     [flip check:  Tn=360s HAc=-4578s GW=T HAz=-4219s DWz=T WF=no]
05:26:37   Imaging to SY_Cnc_V_20170211_052637
05:26:37   (taking 60 sec. exposure, V filter, binning = 1)
05:26:37   (using Image Quality readout mode)
05:26:37   (starting exposure)
05:27:58   (exposure complete and image downloaded)
05:27:59   Image finished
05:28:02   Plate-solve SY_Cnc_V_20170211_052637 final image.
05:28:04   69 image stars found
05:28:04   61 catalog stars found
05:28:04 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
05:28:06     [flip check:  Tn=360s HAc=-4489s GW=T HAz=-4129s DWz=T WF=no]
05:28:06   Imaging to SY_Cnc_V_20170211_052806
05:28:06   (taking 60 sec. exposure, V filter, binning = 1)
05:28:06   (using Image Quality readout mode)
05:28:07   (starting exposure)
05:29:29   (exposure complete and image downloaded)
05:29:29   Image finished
05:29:32   First image plate-solve failed, skip solves until next target.
05:29:34     [flip check:  Tn=360s HAc=-4401s GW=T HAz=-4041s DWz=T WF=no]
05:29:34   Imaging to SY_Cnc_V_20170211_052934
05:29:34   (taking 60 sec. exposure, V filter, binning = 1)
05:29:34   (using Image Quality readout mode)
05:29:34   (starting exposure)
05:30:56   (exposure complete and image downloaded)
05:30:56   Image finished
05:30:58   First image plate-solve failed, skip solves until next target.
05:31:01     [flip check:  Tn=360s HAc=-4314s GW=T HAz=-3954s DWz=T WF=no]
05:31:01   Imaging to SY_Cnc_I_20170211_053101
05:31:01   Switching from V to I filter for imaging
05:31:01   Focus change of -25 steps required
05:31:10   (taking 60 sec. exposure, I filter, binning = 1)
05:31:10   (using Image Quality readout mode)
05:31:11   (starting exposure)
05:32:32   (exposure complete and image downloaded)
05:32:32   Image finished
05:32:35   Plate-solve SY_Cnc_I_20170211_053101 final image.
05:32:37   62 image stars found
05:32:37   61 catalog stars found
05:32:37 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
05:32:41     [flip check:  Tn=360s HAc=-4214s GW=T HAz=-3854s DWz=T WF=no]
05:32:41   Imaging to SY_Cnc_I_20170211_053241
05:32:41   (taking 60 sec. exposure, I filter, binning = 1)
05:32:41   (using Image Quality readout mode)
05:32:41   (starting exposure)
05:34:04   (exposure complete and image downloaded)
05:34:04   Image finished
05:34:07   First image plate-solve failed, skip solves until next target.
05:34:09     [flip check:  Tn=360s HAc=-4125s GW=T HAz=-3766s DWz=T WF=no]
05:34:09   Imaging to SY_Cnc_I_20170211_053409
05:34:09   (taking 60 sec. exposure, I filter, binning = 1)
05:34:09   (using Image Quality readout mode)
05:34:09   (starting exposure)
05:35:31   (exposure complete and image downloaded)
05:35:31   Image finished
05:35:34   First image plate-solve failed, skip solves until next target.
05:35:38 Run complete
ACP console log closed 11-Feb-2017 05:35:38 UTC