ACP console log opened 01-Feb-2017 03:09:20 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:09:20 This is AcquireScheduler V3.5.2
03:09:20 Custom image file path/names are in use
03:09:20 Custom auto-flip parameters are in use
03:09:20   PreFlip=300 PostFlip=120 AF=300 PU=60
03:09:20 Hardware GEM pier side reporting is available.
03:09:21 Initializing AcquireSupport V6.0.7
03:09:21 Weather safe, server is Boltwood Cloud Sensor II
03:09:21 Telescope is ACP->ACP->TMO61, driver V3
03:09:21 Dome is MaxDome
03:09:21 MaxIm DL/CCD is version 5.18
03:09:21 Imager is QSI Universal
03:09:21 Imager readout modes:
03:09:21   0 is Image Quality
03:09:21 Guider is SX Universal(internal/off-axis)
03:09:21 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:09:21 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:09:21 Using focus offsets from FilterInfo.txt
03:09:21 ACPS Observation New Observation(1 of 1)
03:09:21   (belongs to Project Stein, Plan YZ_Cnc)
03:09:21   (turning on sidereal tracking)
03:09:21 Pointing updates are enabled
03:09:21   Start slew to New Observation...
03:09:23   (wait for slew to complete)
03:10:53   (slew complete)
03:10:53     [flip check:  Tn=420s HAc=-12123s GW=T HAz=-11689s DWz=T WF=no]
03:10:53   Updating pointing...
03:10:53   (taking 5 sec. exposure, V filter, binning = 4)
03:10:53   (using Image Quality readout mode)
03:10:53   (starting exposure)
03:11:06   (exposure complete and image downloaded)
03:11:06   Calibrating image...
03:11:06 **Calibration failed. Original image saved.
03:11:06 **MaxIm reports No suitable calibration groups were found.
03:11:06   Image finished
03:11:06   Plate-solve pointing image.
03:11:06   12 image stars found
03:11:06   74 catalog stars found
03:11:06 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
03:11:06   Start slew to offset...
03:11:07   (wait for slew to complete)
03:11:11   (slew complete)
03:11:11   (taking 5 sec. exposure, V filter, binning = 4)
03:11:11   (using Image Quality readout mode)
03:11:11   (starting exposure)
03:11:23   (exposure complete and image downloaded)
03:11:23   Calibrating image...
03:11:23 **Calibration failed. Original image saved.
03:11:23 **MaxIm reports No suitable calibration groups were found.
03:11:23   Image finished
03:11:23   Plate-solve pointing image.
03:11:23   34 image stars found
03:11:24   80 catalog stars found
03:11:24   Solved! 29 stars matched.
03:11:24   Average residual is 0.44 arcsec.
03:11:24   Pointing error is 0.502 arcmin @ angle 309.50
03:11:24   True focal length is 346.2 cm.
03:11:24   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
03:11:24   True image center (J2000): 08h 10m 54.8s   28° 45' 34.64"
03:11:24   Imager sky position angle is 357.7 deg.
03:11:24   Image FWHM is 2.5 arcsec (1.94 pixels)
03:11:24   (avg FWHM = 2.32 arcsec)
03:11:24   [sync] pointing model updated
03:11:24   Re-slew to target.
03:11:24   Start slew to New Observation...
03:11:25   (wait for slew to complete)
03:11:29   (slew complete)
03:11:29   Target is now centered.
03:11:29     [flip check:  Tn=360s HAc=-12074s GW=T HAz=-11713s DWz=T WF=no]
03:11:29   Imaging to YZ_Cnc_V_20170201_031129
03:11:29   (taking 60 sec. exposure, V filter, binning = 1)
03:11:29   (using Image Quality readout mode)
03:11:29   (starting exposure)
03:12:50   (exposure complete and image downloaded)
03:12:50   Image finished
03:12:53   Plate-solve YZ_Cnc_V_20170201_031129 final image.
03:12:55   198 image stars found
03:12:56   74 catalog stars found
03:12:56 ** The calculated plate scale is extremely different from the configured plate scale. Solution is suspect.
03:12:59 Run complete
ACP console log closed 01-Feb-2017 03:12:59 UTC