ACP console log opened 27-Jan-2017 10:53:28 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
10:53:28 This is AcquireScheduler V3.5.2
10:53:28 Custom image file path/names are in use
10:53:28 Custom auto-flip parameters are in use
10:53:28   PreFlip=300 PostFlip=120 AF=300 PU=60
10:53:28 Hardware GEM pier side reporting is available.
10:53:30 Initializing AcquireSupport V6.0.7
10:53:30 Weather safe, server is Boltwood Cloud Sensor II
10:53:30 Telescope is ACP->ACP->TMO61, driver V3
10:53:30 Dome is MaxDome
10:53:30 MaxIm DL/CCD is version 5.18
10:53:30 Imager is QSI Universal
10:53:30 Imager readout modes:
10:53:30   0 is Image Quality
10:53:30 Guider is SX Universal(internal/off-axis)
10:53:30 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
10:53:30 Calculated field of view (arcmin): H = 18.4 V = 13.8
10:53:30 Using focus offsets from FilterInfo.txt
10:53:30 ACPS Observation AT_Cnc(1 of 1)
10:53:30   (belongs to Project SXN, Plan AT_Cnc)
10:53:30   (turning on sidereal tracking)
10:53:30 Pointing updates are enabled
10:53:30   Start slew to AT_Cnc...
10:53:32   (wait for slew to complete)
10:53:43   (slew complete)
10:53:43     [flip check:  Tn=420s HAc=13495s GW=T HAz=13915s DWz=T WF=no]
10:53:43   Updating pointing...
10:53:43   Switching from I to V filter for pointing exposure
10:53:43   Focus change of 25 steps required
10:53:53   (taking 5 sec. exposure, V filter, binning = 4)
10:53:53   (using Image Quality readout mode)
10:53:53   (starting exposure)
10:54:05   (exposure complete and image downloaded)
10:54:05   Calibrating image...
10:54:05 **Calibration failed. Original image saved.
10:54:05 **MaxIm reports No suitable calibration groups were found.
10:54:05   Image finished
10:54:05   Plate-solve pointing image.
10:54:05   20 image stars found
10:54:05   93 catalog stars found
10:54:05   Solved! 20 stars matched.
10:54:06   Average residual is 0.44 arcsec.
10:54:06   Pointing error is 0.800 arcmin @ angle 28.13
10:54:06   True focal length is 345.9 cm.
10:54:06   True binned plate scales (arcsec/pix): H = 1.29 V = 1.29
10:54:06   True image center (J2000): 08h 28m 38.6s   25° 20' 45.33"
10:54:06   Imager sky position angle is 357.8 deg.
10:54:06   Image FWHM is 3.4 arcsec (2.61 pixels)
10:54:06   (avg FWHM = 3.65 arcsec)
10:54:06   [sync] pointing model updated
10:54:06   Internal guider, always re-slew
10:54:06   Re-slew to target.
10:54:06   Start slew to AT_Cnc...
10:54:07   (wait for slew to complete)
10:54:09   (slew complete)
10:54:09   Target is now centered.
10:54:09     [flip check:  Tn=360s HAc=13524s GW=T HAz=13882s DWz=T WF=no]
10:54:09   Imaging to AT_Cnc_V_20170127_105409
10:54:09   (taking 60 sec. exposure, V filter, binning = 1)
10:54:09   (using Image Quality readout mode)
10:54:09   (starting exposure)
10:55:30   (exposure complete and image downloaded)
10:55:30   Image finished
10:55:33   Plate-solve AT_Cnc_V_20170127_105409 final image.
10:55:35   267 image stars found
10:55:35   93 catalog stars found
10:55:35 ** Focal length off by more than 10%, solution rejected.
10:55:37     [flip check:  Tn=360s HAc=13612s GW=T HAz=13970s DWz=T WF=no]
10:55:37   Imaging to AT_Cnc_V_20170127_105537
10:55:37   (taking 60 sec. exposure, V filter, binning = 1)
10:55:37   (using Image Quality readout mode)
10:55:37   (starting exposure)
10:56:59   (exposure complete and image downloaded)
10:56:59   Image finished
10:57:02   First image plate-solve failed, skip solves until next target.
10:57:04     [flip check:  Tn=360s HAc=13699s GW=T HAz=14058s DWz=T WF=no]
10:57:04   Imaging to AT_Cnc_V_20170127_105704
10:57:04   (taking 60 sec. exposure, V filter, binning = 1)
10:57:04   (using Image Quality readout mode)
10:57:04   (starting exposure)
10:58:28   (exposure complete and image downloaded)
10:58:28   Image finished
10:58:30   First image plate-solve failed, skip solves until next target.
10:58:33     [flip check:  Tn=360s HAc=13788s GW=T HAz=14146s DWz=T WF=no]
10:58:33   Imaging to AT_Cnc_I_20170127_105833
10:58:33   Switching from V to I filter for imaging
10:58:33   Focus change of -25 steps required
10:58:42   (taking 60 sec. exposure, I filter, binning = 1)
10:58:42   (using Image Quality readout mode)
10:58:42   (starting exposure)
11:00:05   (exposure complete and image downloaded)
11:00:05   Image finished
11:00:08   Plate-solve AT_Cnc_I_20170127_105833 final image.
11:00:10   206 image stars found
11:00:10   93 catalog stars found
11:00:10 ** The calculated plate scale is extremely different from the configured plate scale. Solution is suspect.
11:00:12     [flip check:  Tn=360s HAc=13888s GW=T HAz=14246s DWz=T WF=no]
11:00:12   Imaging to AT_Cnc_I_20170127_110012
11:00:13   (taking 60 sec. exposure, I filter, binning = 1)
11:00:13   (using Image Quality readout mode)
11:00:13   (starting exposure)
11:01:34   (exposure complete and image downloaded)
11:01:34   Image finished
11:01:37   First image plate-solve failed, skip solves until next target.
11:01:40     [flip check:  Tn=360s HAc=13975s GW=T HAz=14334s DWz=T WF=no]
11:01:40   Imaging to AT_Cnc_I_20170127_110140
11:01:40   (taking 60 sec. exposure, I filter, binning = 1)
11:01:40   (using Image Quality readout mode)
11:01:40   (starting exposure)
11:03:01   (exposure complete and image downloaded)
11:03:01   Image finished
11:03:04   First image plate-solve failed, skip solves until next target.
11:03:07 Run complete
ACP console log closed 27-Jan-2017 11:03:07 UTC