ACP console log opened 07-Dec-2016 08:13:58 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
08:13:58 This is AcquireScheduler V3.5.2
08:13:58 Custom image file path/names are in use
08:13:58 Custom auto-flip parameters are in use
08:13:58   PreFlip=300 PostFlip=120 AF=300 PU=60
08:13:58 Hardware GEM pier side reporting is available.
08:14:00 Initializing AcquireSupport V6.0.7
08:14:00 Weather safe, server is Boltwood Cloud Sensor II
08:14:00 Telescope is ACP->ACP->TMO61, driver V3
08:14:00 Dome is MaxDome
08:14:00 MaxIm DL/CCD is version 5.18
08:14:00 Imager is QSI Universal
08:14:00 Imager readout modes:
08:14:00   0 is Image Quality
08:14:00 Guider is SX Universal(internal/off-axis)
08:14:00 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
08:14:00 Calculated field of view (arcmin): H = 18.4 V = 13.8
08:14:00 Using focus offsets from FilterInfo.txt
08:14:00 ACPS Observation SY_Cnc(1 of 1)
08:14:00   (belongs to Project NMSU, Plan SY_Cnc)
08:14:00   (turning on sidereal tracking)
08:14:00 Pointing updates are enabled
08:14:00   Start slew to SY_Cnc...
08:14:02   (wait for slew to complete)
08:14:29   (slew complete)
08:14:29     [flip check:  Tn=420s HAc=-10090s GW=T HAz=-9670s DWz=T WF=no]
08:14:29   Updating pointing...
08:14:29   Switching from I to V filter for pointing exposure
08:14:29   Focus change of 25 steps required
08:14:39   (taking 5 sec. exposure, V filter, binning = 4)
08:14:39   (using Image Quality readout mode)
08:14:39   (starting exposure)
08:14:52   (exposure complete and image downloaded)
08:14:52   Calibrating image...
08:14:52 **Calibration failed. Original image saved.
08:14:52 **MaxIm reports No suitable calibration groups were found.
08:14:52   Image finished
08:14:52   Plate-solve pointing image.
08:14:52   1 image stars found
08:14:53   61 catalog stars found
08:14:53 ** There are too few image or catalog stars in the area for reliable matching. Take longer exposures, increase the catalog star faint limit, or use a more dense catalog.
08:14:53   Start slew to offset...
08:14:54   (wait for slew to complete)
08:14:57   (slew complete)
08:14:57   (taking 5 sec. exposure, V filter, binning = 4)
08:14:57   (using Image Quality readout mode)
08:14:57   (starting exposure)
08:15:10   (exposure complete and image downloaded)
08:15:10   Calibrating image...
08:15:10 **Calibration failed. Original image saved.
08:15:10 **MaxIm reports No suitable calibration groups were found.
08:15:10   Image finished
08:15:10   Plate-solve pointing image.
08:15:10   1 image stars found
08:15:10   54 catalog stars found
08:15:10 ** There are too few image or catalog stars in the area for reliable matching. Take longer exposures, increase the catalog star faint limit, or use a more dense catalog.
08:15:10   Start slew to SY_Cnc...
08:15:11   (wait for slew to complete)
08:15:13   (slew complete)
08:15:13     [flip check:  Tn=360s HAc=-10046s GW=T HAz=-9687s DWz=T WF=no]
08:15:13   Imaging to SY_Cnc_V_20161207_081513
08:15:13   (taking 60 sec. exposure, V filter, binning = 1)
08:15:13   (using Image Quality readout mode)
08:15:13   (starting exposure)
08:16:36   (exposure complete and image downloaded)
08:16:36   Image finished
08:16:39   Plate-solve SY_Cnc_V_20161207_081513 final image.
08:16:41   9 image stars found
08:16:41   61 catalog stars found
08:16:41 ** No matching stars found. Check your estimated center-point RA/Dec, and your image scaling and quality.
08:16:41     [flip check:  Tn=360s HAc=-9958s GW=T HAz=-9598s DWz=T WF=no]
08:16:41   Imaging to SY_Cnc_V_20161207_081641
08:16:41   (taking 60 sec. exposure, V filter, binning = 1)
08:16:41   (using Image Quality readout mode)
08:16:41   (starting exposure)
08:18:03   (exposure complete and image downloaded)
08:18:03   Image finished
08:18:07   First image plate-solve failed, skip solves until next target.
08:18:07     [flip check:  Tn=360s HAc=-9872s GW=T HAz=-9512s DWz=T WF=no]
08:18:07   Imaging to SY_Cnc_V_20161207_081807
08:18:07   (taking 60 sec. exposure, V filter, binning = 1)
08:18:07   (using Image Quality readout mode)
08:18:07   (starting exposure)
08:19:29   (exposure complete and image downloaded)
08:19:29   Image finished
08:19:32   First image plate-solve failed, skip solves until next target.
08:19:32     [flip check:  Tn=360s HAc=-9787s GW=T HAz=-9427s DWz=T WF=no]
08:19:32   Imaging to SY_Cnc_I_20161207_081932
08:19:32   Switching from V to I filter for imaging
08:19:32   Focus change of -25 steps required
08:19:42   (taking 60 sec. exposure, I filter, binning = 1)
08:19:42   (using Image Quality readout mode)
08:19:42   (starting exposure)
08:21:04   (exposure complete and image downloaded)
08:21:04   Image finished
08:21:07   Plate-solve SY_Cnc_I_20161207_081932 final image.
08:21:08   42 image stars found
08:21:09   61 catalog stars found
08:21:09 ** Focal length off by more than 10%, solution rejected.
08:21:09     [flip check:  Tn=360s HAc=-9690s GW=T HAz=-9330s DWz=T WF=no]
08:21:09   Imaging to SY_Cnc_I_20161207_082109
08:21:09   (taking 60 sec. exposure, I filter, binning = 1)
08:21:09   (using Image Quality readout mode)
08:21:09   (starting exposure)
08:22:30   (exposure complete and image downloaded)
08:22:31   Image finished
08:22:33   First image plate-solve failed, skip solves until next target.
08:22:33     [flip check:  Tn=360s HAc=-9605s GW=T HAz=-9245s DWz=T WF=no]
08:22:34   Imaging to SY_Cnc_I_20161207_082234
08:22:34   (taking 60 sec. exposure, I filter, binning = 1)
08:22:34   (using Image Quality readout mode)
08:22:34   (starting exposure)
08:23:56   (exposure complete and image downloaded)
08:23:57   Image finished
08:23:59   First image plate-solve failed, skip solves until next target.
08:24:00 Run complete
ACP console log closed 07-Dec-2016 08:24:00 UTC