ACP console log opened 06-Dec-2016 07:17:37 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
07:17:37 This is AcquireScheduler V3.5.2
07:17:37 Custom image file path/names are in use
07:17:37 Custom auto-flip parameters are in use
07:17:37   PreFlip=300 PostFlip=120 AF=300 PU=60
07:17:37 Hardware GEM pier side reporting is available.
07:17:38 Initializing AcquireSupport V6.0.7
07:17:39 Weather safe, server is Boltwood Cloud Sensor II
07:17:39 Telescope is ACP->ACP->TMO61, driver V3
07:17:39 Dome is MaxDome
07:17:39 MaxIm DL/CCD is version 5.18
07:17:39 Imager is QSI Universal
07:17:39 Imager readout modes:
07:17:39   0 is Image Quality
07:17:39 Guider is SX Universal(internal/off-axis)
07:17:39 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
07:17:39 Calculated field of view (arcmin): H = 18.4 V = 13.8
07:17:39 Using focus offsets from FilterInfo.txt
07:17:39 ACPS Observation SY_Cnc(1 of 1)
07:17:39   (belongs to Project NMSU, Plan SY_Cnc)
07:17:39   (turning on sidereal tracking)
07:17:39 Pointing updates are enabled
07:17:39   Start slew to SY_Cnc...
07:17:41   (wait for slew to complete)
07:19:33   (slew complete)
07:19:33     [flip check:  Tn=420s HAc=-13632s GW=T HAz=-13212s DWz=T WF=no]
07:19:33   Updating pointing...
07:19:33   Switching from I to V filter for pointing exposure
07:19:33   Focus change of 25 steps required
07:19:43   (taking 5 sec. exposure, V filter, binning = 4)
07:19:43   (using Image Quality readout mode)
07:19:43   (starting exposure)
07:19:56   (exposure complete and image downloaded)
07:19:56   Calibrating image...
07:19:56 **Calibration failed. Original image saved.
07:19:56 **MaxIm reports No suitable calibration groups were found.
07:19:56   Image finished
07:19:56   Plate-solve pointing image.
07:19:56   17 image stars found
07:19:57   61 catalog stars found
07:19:57   Solved! 12 stars matched.
07:19:57   Average residual is 0.4 arcsec.
07:19:57   Pointing error is 1.012 arcmin @ angle 70.82
07:19:57   True focal length is 346.3 cm.
07:19:57   True binned plate scales (arcsec/pix): H = 1.28 V = 1.29
07:19:57   True image center (J2000): 09h 01m 07.3s   17° 54' 15.94"
07:19:57   Imager sky position angle is 357.7 deg.
07:19:57   Image FWHM is 3.4 arcsec (2.62 pixels)
07:19:57   (avg FWHM = 3.11 arcsec)
07:19:57   [sync] pointing model updated
07:19:57   Internal guider, always re-slew
07:19:57   Re-slew to target.
07:19:57   Start slew to SY_Cnc...
07:19:58   (wait for slew to complete)
07:19:59   (slew complete)
07:19:59   Target is now centered.
07:19:59     [flip check:  Tn=360s HAc=-13606s GW=T HAz=-13246s DWz=T WF=no]
07:20:00   Imaging to SY_Cnc_V_20161206_072000
07:20:00   (taking 60 sec. exposure, V filter, binning = 1)
07:20:00   (using Image Quality readout mode)
07:20:00   (starting exposure)
07:21:21   (exposure complete and image downloaded)
07:21:21   Image finished
07:21:24   Plate-solve SY_Cnc_V_20161206_072000 final image.
07:21:26   111 image stars found
07:21:26   61 catalog stars found
07:21:26 ** Focal length off by more than 10%, solution rejected.
07:21:26     [flip check:  Tn=360s HAc=-13515s GW=T HAz=-13159s DWz=T WF=no]
07:21:26   Imaging to SY_Cnc_V_20161206_072126
07:21:26   (taking 60 sec. exposure, V filter, binning = 1)
07:21:26   (using Image Quality readout mode)
07:21:26   (starting exposure)
07:22:48   (exposure complete and image downloaded)
07:22:48   Image finished
07:22:52   First image plate-solve failed, skip solves until next target.
07:22:52     [flip check:  Tn=360s HAc=-13429s GW=T HAz=-13072s DWz=T WF=no]
07:22:52   Imaging to SY_Cnc_V_20161206_072252
07:22:52   (taking 60 sec. exposure, V filter, binning = 1)
07:22:52   (using Image Quality readout mode)
07:22:52   (starting exposure)
07:24:14   (exposure complete and image downloaded)
07:24:14   Image finished
07:24:17   First image plate-solve failed, skip solves until next target.
07:24:17     [flip check:  Tn=360s HAc=-13344s GW=T HAz=-12987s DWz=T WF=no]
07:24:17   Imaging to SY_Cnc_I_20161206_072417
07:24:17   Switching from V to I filter for imaging
07:24:17   Focus change of -25 steps required
07:24:27   (taking 60 sec. exposure, I filter, binning = 1)
07:24:27   (using Image Quality readout mode)
07:24:27   (starting exposure)
07:25:49   (exposure complete and image downloaded)
07:25:49   Image finished
07:25:53   Plate-solve SY_Cnc_I_20161206_072417 final image.
07:25:54   170 image stars found
07:25:55   61 catalog stars found
07:25:55 ** The calculated plate scale is extremely different from the configured plate scale. Solution is suspect.
07:25:55     [flip check:  Tn=360s HAc=-13247s GW=T HAz=-12889s DWz=T WF=no]
07:25:55   Imaging to SY_Cnc_I_20161206_072555
07:25:55   (taking 60 sec. exposure, I filter, binning = 1)
07:25:55   (using Image Quality readout mode)
07:25:55   (starting exposure)
07:27:17   (exposure complete and image downloaded)
07:27:17   Image finished
07:27:19   First image plate-solve failed, skip solves until next target.
07:27:19     [flip check:  Tn=360s HAc=-13162s GW=T HAz=-12804s DWz=T WF=no]
07:27:20   Imaging to SY_Cnc_I_20161206_072719
07:27:20   (taking 60 sec. exposure, I filter, binning = 1)
07:27:20   (using Image Quality readout mode)
07:27:20   (starting exposure)
07:28:41   (exposure complete and image downloaded)
07:28:41   Image finished
07:28:44   First image plate-solve failed, skip solves until next target.
07:28:45 Run complete
ACP console log closed 06-Dec-2016 07:28:45 UTC