ACP console log opened 17-Dec-2015 03:00:43 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:00:43 This is AcquireScheduler V3.5.2
03:00:43 Custom image file path/names are in use
03:00:43 Custom auto-flip parameters are in use
03:00:43   PreFlip=300 PostFlip=120 AF=300 PU=60
03:00:43 Hardware GEM pier side reporting is available.
03:00:46 Initializing AcquireSupport V6.0.7
03:00:48 Weather safe, server is Boltwood Cloud Sensor II
03:00:48 Telescope is ACP->ACP->TMO61, driver V3
03:00:48 Dome is MaxDome
03:00:48 MaxIm DL/CCD is version 5.18
03:00:48 Imager is QSI Universal
03:00:48 Imager readout modes:
03:00:48   0 is Image Quality
03:00:48 Guider is SX Universal(internal/off-axis)
03:00:48 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:00:48 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:00:48 Using focus offsets from FilterInfo.txt
03:00:48 ACPS Observation Z_Tau(1 of 1)
03:00:48   (belongs to Project Mogul_Mira, Plan Z_Tau)
03:00:48   (turning on sidereal tracking)
03:00:48 Pointing updates are enabled
03:00:48   Start slew to Z_Tau...
03:00:49 **Script Error (Tracking has been stopped)**
03:00:49 Source:  ASCOM.SiTechDll.Telescope
03:00:49 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:00:49 Script Context:
03:00:49     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:00:49     1739:         End If
03:00:49     1740:     Else
03:00:49 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:00:49                   ^
03:00:49     1742:     End If
03:00:49     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:00:49     1744:     
03:00:49 -- end --
ACP console log closed 17-Dec-2015 03:00:49 UTC