ACP console log opened 17-Dec-2015 03:13:35 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:13:35 This is AcquireScheduler V3.5.2
03:13:35 Custom image file path/names are in use
03:13:35 Custom auto-flip parameters are in use
03:13:35   PreFlip=300 PostFlip=120 AF=300 PU=60
03:13:35 Hardware GEM pier side reporting is available.
03:13:38 Initializing AcquireSupport V6.0.7
03:13:39 Weather safe, server is Boltwood Cloud Sensor II
03:13:39 Telescope is ACP->ACP->TMO61, driver V3
03:13:39 Dome is MaxDome
03:13:39 MaxIm DL/CCD is version 5.18
03:13:39 Imager is QSI Universal
03:13:39 Imager readout modes:
03:13:39   0 is Image Quality
03:13:39 Guider is SX Universal(internal/off-axis)
03:13:39 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:13:39 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:13:39 Using focus offsets from FilterInfo.txt
03:13:39 ACPS Observation VV_Gem(1 of 1)
03:13:39   (belongs to Project Mogul_Mira, Plan VV_Gem)
03:13:39   (turning on sidereal tracking)
03:13:39 Pointing updates are enabled
03:13:39   Start slew to VV_Gem...
03:13:40 **Script Error (Tracking has been stopped)**
03:13:40 Source:  ASCOM.SiTechDll.Telescope
03:13:40 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:13:40 Script Context:
03:13:40     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:13:40     1739:         End If
03:13:40     1740:     Else
03:13:40 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:13:40                   ^
03:13:40     1742:     End If
03:13:40     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:13:40     1744:     
03:13:40 -- end --
ACP console log closed 17-Dec-2015 03:13:40 UTC