ACP console log opened 17-Dec-2015 03:44:22 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:44:22 This is AcquireScheduler V3.5.2
03:44:22 Custom image file path/names are in use
03:44:22 Custom auto-flip parameters are in use
03:44:22   PreFlip=300 PostFlip=120 AF=300 PU=60
03:44:22 Hardware GEM pier side reporting is available.
03:44:23 Initializing AcquireSupport V6.0.7
03:44:23 Weather safe, server is Boltwood Cloud Sensor II
03:44:23 Telescope is ACP->ACP->TMO61, driver V3
03:44:24 Dome is MaxDome
03:44:24 MaxIm DL/CCD is version 5.18
03:44:24 Imager is QSI Universal
03:44:24 Imager readout modes:
03:44:24   0 is Image Quality
03:44:24 Guider is SX Universal(internal/off-axis)
03:44:24 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:44:24 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:44:24 Using focus offsets from FilterInfo.txt
03:44:24 ACPS Observation T_Ori(1 of 1)
03:44:24   (belongs to Project AAVSO_Monitoring, Plan T_Ori)
03:44:24   (turning on sidereal tracking)
03:44:24 Pointing updates are enabled
03:44:24   Start slew to T_Ori...
03:44:24 **Script Error (Tracking has been stopped)**
03:44:24 Source:  ASCOM.SiTechDll.Telescope
03:44:24 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:44:24 Script Context:
03:44:24     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:44:24     1739:         End If
03:44:24     1740:     Else
03:44:24 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:44:24                   ^
03:44:24     1742:     End If
03:44:24     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:44:24     1744:     
03:44:24 -- end --
ACP console log closed 17-Dec-2015 03:44:24 UTC