ACP console log opened 17-Dec-2015 04:51:44 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:51:44 This is AcquireScheduler V3.5.2
04:51:44 Custom image file path/names are in use
04:51:44 Custom auto-flip parameters are in use
04:51:44   PreFlip=300 PostFlip=120 AF=300 PU=60
04:51:44 Hardware GEM pier side reporting is available.
04:51:45 Initializing AcquireSupport V6.0.7
04:51:47 Weather safe, server is Boltwood Cloud Sensor II
04:51:47 Telescope is ACP->ACP->TMO61, driver V3
04:51:47 Dome is MaxDome
04:51:47 MaxIm DL/CCD is version 5.18
04:51:47 Imager is QSI Universal
04:51:47 Imager readout modes:
04:51:47   0 is Image Quality
04:51:47 Guider is SX Universal(internal/off-axis)
04:51:48 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:51:48 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:51:48 Using focus offsets from FilterInfo.txt
04:51:48 ACPS Observation T_CMi(1 of 1)
04:51:48   (belongs to Project Mogul_Mira, Plan T_CMi)
04:51:48   (turning on sidereal tracking)
04:51:48 Pointing updates are enabled
04:51:48   Start slew to T_CMi...
04:51:48 **Script Error (Tracking has been stopped)**
04:51:48 Source:  ASCOM.SiTechDll.Telescope
04:51:48 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:51:48 Script Context:
04:51:48     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:51:48     1739:         End If
04:51:48     1740:     Else
04:51:48 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:51:48                   ^
04:51:48     1742:     End If
04:51:48     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:51:48     1744:     
04:51:48 -- end --
ACP console log closed 17-Dec-2015 04:51:48 UTC