ACP console log opened 17-Dec-2015 02:56:53 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:56:53 This is AcquireScheduler V3.5.2
02:56:53 Custom image file path/names are in use
02:56:53 Custom auto-flip parameters are in use
02:56:53   PreFlip=300 PostFlip=120 AF=300 PU=60
02:56:53 Hardware GEM pier side reporting is available.
02:56:55 Initializing AcquireSupport V6.0.7
02:56:56 Weather safe, server is Boltwood Cloud Sensor II
02:56:56 Telescope is ACP->ACP->TMO61, driver V3
02:56:57 Dome is MaxDome
02:56:57 MaxIm DL/CCD is version 5.18
02:56:57 Imager is QSI Universal
02:56:57 Imager readout modes:
02:56:57   0 is Image Quality
02:56:57 Guider is SX Universal(internal/off-axis)
02:56:57 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:56:57 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:56:57 Using focus offsets from FilterInfo.txt
02:56:57 ACPS Observation ST_Aur(1 of 1)
02:56:57   (belongs to Project Mogul_Mira, Plan ST_Aur)
02:56:57   (turning on sidereal tracking)
02:56:57 Pointing updates are enabled
02:56:57   Start slew to ST_Aur...
02:56:57 **Script Error (Tracking has been stopped)**
02:56:57 Source:  ASCOM.SiTechDll.Telescope
02:56:57 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:56:57 Script Context:
02:56:57     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:56:57     1739:         End If
02:56:57     1740:     Else
02:56:57 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:56:57                   ^
02:56:57     1742:     End If
02:56:57     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:56:57     1744:     
02:56:57 -- end --
ACP console log closed 17-Dec-2015 02:56:57 UTC