ACP console log opened 17-Dec-2015 02:52:31 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
02:52:31 This is AcquireScheduler V3.5.2
02:52:31 Custom image file path/names are in use
02:52:31 Custom auto-flip parameters are in use
02:52:31   PreFlip=300 PostFlip=120 AF=300 PU=60
02:52:31 Hardware GEM pier side reporting is available.
02:52:32 Initializing AcquireSupport V6.0.7
02:52:33 Weather safe, server is Boltwood Cloud Sensor II
02:52:33 Telescope is ACP->ACP->TMO61, driver V3
02:52:34 Dome is MaxDome
02:52:34 MaxIm DL/CCD is version 5.18
02:52:34 Imager is QSI Universal
02:52:34 Imager readout modes:
02:52:34   0 is Image Quality
02:52:34 Guider is SX Universal(internal/off-axis)
02:52:34 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
02:52:34 Calculated field of view (arcmin): H = 18.4 V = 13.8
02:52:34 Using focus offsets from FilterInfo.txt
02:52:34 ACPS Observation NGC_7790(1 of 1)
02:52:34   (belongs to Project AAVSO_Monitoring, Plan NGC_7790)
02:52:34   (turning on sidereal tracking)
02:52:34 Pointing updates are enabled
02:52:34   Start slew to NGC_7790...
02:52:34 **Script Error (Tracking has been stopped)**
02:52:34 Source:  ASCOM.SiTechDll.Telescope
02:52:34 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
02:52:35 Script Context:
02:52:35     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
02:52:35     1739:         End If
02:52:35     1740:     Else
02:52:35 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
02:52:35                   ^
02:52:35     1742:     End If
02:52:35     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
02:52:35     1744:     
02:52:35 -- end --
ACP console log closed 17-Dec-2015 02:52:35 UTC