ACP console log opened 17-Dec-2015 03:27:30 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:27:30 This is AcquireScheduler V3.5.2
03:27:30 Custom image file path/names are in use
03:27:30 Custom auto-flip parameters are in use
03:27:30   PreFlip=300 PostFlip=120 AF=300 PU=60
03:27:30 Hardware GEM pier side reporting is available.
03:27:31 Initializing AcquireSupport V6.0.7
03:27:32 Weather safe, server is Boltwood Cloud Sensor II
03:27:32 Telescope is ACP->ACP->TMO61, driver V3
03:27:33 Dome is MaxDome
03:27:33 MaxIm DL/CCD is version 5.18
03:27:33 Imager is QSI Universal
03:27:33 Imager readout modes:
03:27:33   0 is Image Quality
03:27:33 Guider is SX Universal(internal/off-axis)
03:27:33 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:27:33 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:27:33 Using focus offsets from FilterInfo.txt
03:27:33 ACPS Observation CB_32(1 of 1)
03:27:33   (belongs to Project Staels, Plan CB_32)
03:27:33   (turning on sidereal tracking)
03:27:33 Pointing updates are enabled
03:27:33   Start slew to CB_32...
03:27:33 **Script Error (Tracking has been stopped)**
03:27:33 Source:  ASCOM.SiTechDll.Telescope
03:27:33 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:27:33 Script Context:
03:27:33     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:27:33     1739:         End If
03:27:33     1740:     Else
03:27:33 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:27:33                   ^
03:27:33     1742:     End If
03:27:33     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:27:33     1744:     
03:27:33 -- end --
ACP console log closed 17-Dec-2015 03:27:33 UTC