ACP console log opened 04-Dec-2015 05:31:22 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:31:22 This is AcquireScheduler V3.5.2
05:31:22 Custom image file path/names are in use
05:31:22 Custom auto-flip parameters are in use
05:31:22   PreFlip=300 PostFlip=120 AF=300 PU=60
05:31:22 Hardware GEM pier side reporting is available.
05:31:24 Initializing AcquireSupport V6.0.7
05:31:24 Weather safe, server is Boltwood Cloud Sensor II
05:31:24 Telescope is ACP->ACP->TMO61, driver V3
05:31:24 Dome is MaxDome
05:31:24 MaxIm DL/CCD is version 5.18
05:31:24 Imager is QSI Universal
05:31:24 Imager readout modes:
05:31:24   0 is Image Quality
05:31:24 Guider is SX Universal(internal/off-axis)
05:31:24 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:31:24 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:31:24 Using focus offsets from FilterInfo.txt
05:31:24 ACPS Observation WX_CMi(1 of 1)
05:31:24   (belongs to Project Mogul_Mira, Plan WX_CMi)
05:31:24   (turning on sidereal tracking)
05:31:24 Pointing updates are enabled
05:31:24   Start slew to WX_CMi...
05:31:24 **Script Error (Tracking has been stopped)**
05:31:24 Source:  ASCOM.SiTechDll.Telescope
05:31:24 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:31:24 Script Context:
05:31:24     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:31:24     1739:         End If
05:31:24     1740:     Else
05:31:24 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:31:24                   ^
05:31:24     1742:     End If
05:31:24     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:31:24     1744:     
05:31:24 -- end --
ACP console log closed 04-Dec-2015 05:31:25 UTC