ACP console log opened 04-Dec-2015 03:59:30 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:59:30 This is AcquireScheduler V3.5.2
03:59:30 Custom image file path/names are in use
03:59:30 Custom auto-flip parameters are in use
03:59:30   PreFlip=300 PostFlip=120 AF=300 PU=60
03:59:30 Hardware GEM pier side reporting is available.
03:59:31 Initializing AcquireSupport V6.0.7
03:59:31 Weather safe, server is Boltwood Cloud Sensor II
03:59:31 Telescope is ACP->ACP->TMO61, driver V3
03:59:31 Dome is MaxDome
03:59:31 MaxIm DL/CCD is version 5.18
03:59:31 Imager is QSI Universal
03:59:31 Imager readout modes:
03:59:31   0 is Image Quality
03:59:31 Guider is SX Universal(internal/off-axis)
03:59:31 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:59:31 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:59:31 Using focus offsets from FilterInfo.txt
03:59:31 ACPS Observation V1404_Cyg_TMO61(1 of 1)
03:59:31   (belongs to Project Walker, Plan V1404_Cyg)
03:59:31   (turning on sidereal tracking)
03:59:31 Pointing updates are enabled
03:59:31   Start slew to V1404_Cyg_TMO61...
03:59:32 **Script Error (Tracking has been stopped)**
03:59:32 Source:  ASCOM.SiTechDll.Telescope
03:59:32 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:59:32 Script Context:
03:59:32     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:59:32     1739:         End If
03:59:32     1740:     Else
03:59:32 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:59:32                   ^
03:59:32     1742:     End If
03:59:32     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:59:32     1744:     
03:59:32 -- end --
ACP console log closed 04-Dec-2015 03:59:32 UTC