ACP console log opened 04-Dec-2015 05:42:33 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
05:42:33 This is AcquireScheduler V3.5.2
05:42:33 Custom image file path/names are in use
05:42:33 Custom auto-flip parameters are in use
05:42:33   PreFlip=300 PostFlip=120 AF=300 PU=60
05:42:33 Hardware GEM pier side reporting is available.
05:42:34 Initializing AcquireSupport V6.0.7
05:42:35 Weather safe, server is Boltwood Cloud Sensor II
05:42:35 Telescope is ACP->ACP->TMO61, driver V3
05:42:35 Dome is MaxDome
05:42:35 MaxIm DL/CCD is version 5.18
05:42:35 Imager is QSI Universal
05:42:35 Imager readout modes:
05:42:35   0 is Image Quality
05:42:35 Guider is SX Universal(internal/off-axis)
05:42:35 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
05:42:35 Calculated field of view (arcmin): H = 18.4 V = 13.8
05:42:35 Using focus offsets from FilterInfo.txt
05:42:35 ACPS Observation T_CMi(1 of 1)
05:42:35   (belongs to Project Mogul_Mira, Plan T_CMi)
05:42:35   (turning on sidereal tracking)
05:42:35 Pointing updates are enabled
05:42:35   Start slew to T_CMi...
05:42:35 **Script Error (Tracking has been stopped)**
05:42:35 Source:  ASCOM.SiTechDll.Telescope
05:42:35 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
05:42:35 Script Context:
05:42:35     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
05:42:35     1739:         End If
05:42:35     1740:     Else
05:42:35 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
05:42:35                   ^
05:42:35     1742:     End If
05:42:35     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
05:42:35     1744:     
05:42:35 -- end --
ACP console log closed 04-Dec-2015 05:42:35 UTC