ACP console log opened 04-Dec-2015 04:25:32 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:25:32 This is AcquireScheduler V3.5.2
04:25:32 Custom image file path/names are in use
04:25:32 Custom auto-flip parameters are in use
04:25:32   PreFlip=300 PostFlip=120 AF=300 PU=60
04:25:32 Hardware GEM pier side reporting is available.
04:25:33 Initializing AcquireSupport V6.0.7
04:25:33 Weather safe, server is Boltwood Cloud Sensor II
04:25:33 Telescope is ACP->ACP->TMO61, driver V3
04:25:33 Dome is MaxDome
04:25:33 MaxIm DL/CCD is version 5.18
04:25:33 Imager is QSI Universal
04:25:33 Imager readout modes:
04:25:33   0 is Image Quality
04:25:33 Guider is SX Universal(internal/off-axis)
04:25:33 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:25:33 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:25:33 Using focus offsets from FilterInfo.txt
04:25:33 ACPS Observation S_Ori(1 of 1)
04:25:33   (belongs to Project Mogul_Mira, Plan S_Ori)
04:25:33   (turning on sidereal tracking)
04:25:33 Pointing updates are enabled
04:25:33   Start slew to S_Ori...
04:25:34 **Script Error (Tracking has been stopped)**
04:25:34 Source:  ASCOM.SiTechDll.Telescope
04:25:34 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:25:34 Script Context:
04:25:34     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:25:34     1739:         End If
04:25:34     1740:     Else
04:25:34 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:25:34                   ^
04:25:34     1742:     End If
04:25:34     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:25:34     1744:     
04:25:34 -- end --
ACP console log closed 04-Dec-2015 04:25:34 UTC