ACP console log opened 04-Dec-2015 03:59:49 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
03:59:49 This is AcquireScheduler V3.5.2
03:59:49 Custom image file path/names are in use
03:59:49 Custom auto-flip parameters are in use
03:59:49   PreFlip=300 PostFlip=120 AF=300 PU=60
03:59:49 Hardware GEM pier side reporting is available.
03:59:50 Initializing AcquireSupport V6.0.7
03:59:50 Weather safe, server is Boltwood Cloud Sensor II
03:59:50 Telescope is ACP->ACP->TMO61, driver V3
03:59:50 Dome is MaxDome
03:59:50 MaxIm DL/CCD is version 5.18
03:59:50 Imager is QSI Universal
03:59:50 Imager readout modes:
03:59:50   0 is Image Quality
03:59:50 Guider is SX Universal(internal/off-axis)
03:59:50 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
03:59:50 Calculated field of view (arcmin): H = 18.4 V = 13.8
03:59:50 Using focus offsets from FilterInfo.txt
03:59:50 ACPS Observation SV_And(1 of 1)
03:59:50   (belongs to Project Mogul_Mira, Plan SV_And)
03:59:50   (turning on sidereal tracking)
03:59:50 Pointing updates are enabled
03:59:50   Start slew to SV_And...
03:59:59 **Script Error (Tracking has been stopped)**
03:59:59 Source:  ASCOM.SiTechDll.Telescope
03:59:59 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
03:59:59 Script Context:
03:59:59     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
03:59:59     1739:         End If
03:59:59     1740:     Else
03:59:59 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
03:59:59                   ^
03:59:59     1742:     End If
03:59:59     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
03:59:59     1744:     
03:59:59 -- end --
ACP console log closed 04-Dec-2015 03:59:59 UTC