ACP console log opened 04-Dec-2015 04:00:07 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:00:07 This is AcquireScheduler V3.5.2
04:00:07 Custom image file path/names are in use
04:00:07 Custom auto-flip parameters are in use
04:00:07   PreFlip=300 PostFlip=120 AF=300 PU=60
04:00:07 Hardware GEM pier side reporting is available.
04:00:08 Initializing AcquireSupport V6.0.7
04:00:08 Weather safe, server is Boltwood Cloud Sensor II
04:00:08 Telescope is ACP->ACP->TMO61, driver V3
04:00:09 Dome is MaxDome
04:00:09 MaxIm DL/CCD is version 5.18
04:00:09 Imager is QSI Universal
04:00:09 Imager readout modes:
04:00:09   0 is Image Quality
04:00:09 Guider is SX Universal(internal/off-axis)
04:00:09 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:00:09 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:00:09 Using focus offsets from FilterInfo.txt
04:00:09 ACPS Observation SA93_317(1 of 1)
04:00:09   (belongs to Project Landolt_1, Plan SA93_317)
04:00:09   (turning on sidereal tracking)
04:00:09 Pointing updates are enabled
04:00:09   Start slew to SA93_317...
04:00:11 **Script Error (Tracking has been stopped)**
04:00:11 Source:  ASCOM.SiTechDll.Telescope
04:00:11 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:00:11 Script Context:
04:00:11     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:00:11     1739:         End If
04:00:11     1740:     Else
04:00:11 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:00:11                   ^
04:00:11     1742:     End If
04:00:11     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:00:11     1744:     
04:00:11 -- end --
ACP console log closed 04-Dec-2015 04:00:12 UTC