ACP console log opened 04-Dec-2015 09:02:34 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
09:02:34 This is AcquireScheduler V3.5.2
09:02:34 Custom image file path/names are in use
09:02:34 Custom auto-flip parameters are in use
09:02:34   PreFlip=300 PostFlip=120 AF=300 PU=60
09:02:34 Hardware GEM pier side reporting is available.
09:02:35 Initializing AcquireSupport V6.0.7
09:02:35 Weather safe, server is Boltwood Cloud Sensor II
09:02:35 Telescope is ACP->ACP->TMO61, driver V3
09:02:35 Dome is MaxDome
09:02:36 MaxIm DL/CCD is version 5.18
09:02:36 Imager is QSI Universal
09:02:36 Imager readout modes:
09:02:36   0 is Image Quality
09:02:36 Guider is SX Universal(internal/off-axis)
09:02:36 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
09:02:36 Calculated field of view (arcmin): H = 18.4 V = 13.8
09:02:36 Using focus offsets from FilterInfo.txt
09:02:36 ACPS Observation SA100_267(1 of 1)
09:02:36   (belongs to Project Landolt_1, Plan SA100_267)
09:02:36   (turning on sidereal tracking)
09:02:36 Pointing updates are enabled
09:02:36   Start slew to SA100_267...
09:02:36 **Script Error (Tracking has been stopped)**
09:02:36 Source:  ASCOM.SiTechDll.Telescope
09:02:36 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
09:02:36 Script Context:
09:02:36     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
09:02:36     1739:         End If
09:02:36     1740:     Else
09:02:36 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
09:02:36                   ^
09:02:36     1742:     End If
09:02:36     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
09:02:36     1744:     
09:02:36 -- end --
ACP console log closed 04-Dec-2015 09:02:36 UTC