ACP console log opened 04-Dec-2015 04:02:21 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:02:21 This is AcquireScheduler V3.5.2
04:02:21 Custom image file path/names are in use
04:02:21 Custom auto-flip parameters are in use
04:02:21   PreFlip=300 PostFlip=120 AF=300 PU=60
04:02:21 Hardware GEM pier side reporting is available.
04:02:22 Initializing AcquireSupport V6.0.7
04:02:22 Weather safe, server is Boltwood Cloud Sensor II
04:02:22 Telescope is ACP->ACP->TMO61, driver V3
04:02:22 Dome is MaxDome
04:02:22 MaxIm DL/CCD is version 5.18
04:02:22 Imager is QSI Universal
04:02:22 Imager readout modes:
04:02:22   0 is Image Quality
04:02:22 Guider is SX Universal(internal/off-axis)
04:02:22 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:02:22 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:02:22 Using focus offsets from FilterInfo.txt
04:02:22 ACPS Observation IC_348(1 of 1)
04:02:22   (belongs to Project Staels, Plan IC_348)
04:02:22   (turning on sidereal tracking)
04:02:22 Pointing updates are enabled
04:02:22   Start slew to IC_348...
04:02:23 **Script Error (Tracking has been stopped)**
04:02:23 Source:  ASCOM.SiTechDll.Telescope
04:02:23 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:02:23 Script Context:
04:02:23     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:02:23     1739:         End If
04:02:23     1740:     Else
04:02:23 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:02:23                   ^
04:02:23     1742:     End If
04:02:23     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:02:23     1744:     
04:02:23 -- end --
ACP console log closed 04-Dec-2015 04:02:23 UTC