ACP console log opened 04-Dec-2015 04:18:39 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
04:18:39 This is AcquireScheduler V3.5.2
04:18:39 Custom image file path/names are in use
04:18:39 Custom auto-flip parameters are in use
04:18:39   PreFlip=300 PostFlip=120 AF=300 PU=60
04:18:39 Hardware GEM pier side reporting is available.
04:18:40 Initializing AcquireSupport V6.0.7
04:18:40 Weather safe, server is Boltwood Cloud Sensor II
04:18:40 Telescope is ACP->ACP->TMO61, driver V3
04:18:41 Dome is MaxDome
04:18:41 MaxIm DL/CCD is version 5.18
04:18:41 Imager is QSI Universal
04:18:41 Imager readout modes:
04:18:41   0 is Image Quality
04:18:41 Guider is SX Universal(internal/off-axis)
04:18:41 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
04:18:41 Calculated field of view (arcmin): H = 18.4 V = 13.8
04:18:41 Using focus offsets from FilterInfo.txt
04:18:41 ACPS Observation CB_32(1 of 1)
04:18:41   (belongs to Project Staels, Plan CB_32)
04:18:41   (turning on sidereal tracking)
04:18:41 Pointing updates are enabled
04:18:41   Start slew to CB_32...
04:18:41 **Script Error (Tracking has been stopped)**
04:18:41 Source:  ASCOM.SiTechDll.Telescope
04:18:41 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
04:18:41 Script Context:
04:18:41     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
04:18:41     1739:         End If
04:18:41     1740:     Else
04:18:41 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
04:18:41                   ^
04:18:41     1742:     End If
04:18:41     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
04:18:41     1744:     
04:18:41 -- end --
ACP console log closed 04-Dec-2015 04:18:41 UTC