ACP console log opened 04-Dec-2015 11:37:34 UTC
This is ACP version 6.0 (build 14, Special for Wodaski Alt/Az Scope)
Licensed to Arne Henden
11:37:34 This is AcquireScheduler V3.5.2
11:37:34 Custom image file path/names are in use
11:37:34 Custom auto-flip parameters are in use
11:37:34   PreFlip=300 PostFlip=120 AF=300 PU=60
11:37:34 Hardware GEM pier side reporting is available.
11:37:35 Initializing AcquireSupport V6.0.7
11:37:35 Weather safe, server is Boltwood Cloud Sensor II
11:37:35 Telescope is ACP->ACP->TMO61, driver V3
11:37:35 Dome is MaxDome
11:37:35 MaxIm DL/CCD is version 5.18
11:37:35 Imager is QSI Universal
11:37:35 Imager readout modes:
11:37:35   0 is Image Quality
11:37:35 Guider is SX Universal(internal/off-axis)
11:37:35 Calculated unbinned plate scales (arcsec/pix): H = 0.33 V = 0.33
11:37:35 Calculated field of view (arcmin): H = 18.4 V = 13.8
11:37:35 Using focus offsets from FilterInfo.txt
11:37:35 ACPS Observation BL_Boo_GRH(1 of 1)
11:37:35   (belongs to Project Walker, Plan BL_Boo_GRH)
11:37:35   (turning on sidereal tracking)
11:37:35 Pointing updates are enabled
11:37:35   Start slew to BL_Boo_GRH...
11:37:36 **Script Error (Tracking has been stopped)**
11:37:36 Source:  ASCOM.SiTechDll.Telescope
11:37:36 Message: sttgaSiTech Says: Motor(s) in Blinky Mode! at line 1741 column 9.
11:37:36 Script Context:
11:37:36     1738:             SUP.CalcSimImageCoordinates TargetRA, TargetDec         ' Calculate simulator image
11:37:36     1739:         End If
11:37:36     1740:     Else
11:37:36 =>  1741:         SUP.StartSlewJ2000 OBS.Name, TargetRA, TargetDec            ' START THE SLEW
11:37:36                   ^
11:37:36     1742:     End If
11:37:36     1743:     If SUP.HaveRotator Then SUP.StartRotateToPA OBS.PA, TargetRA    ' Always start rotator slew
11:37:36     1744:     
11:37:36 -- end --
ACP console log closed 04-Dec-2015 11:37:36 UTC